Fórum Debian

Versão Completa: boot lilo
Você está atualmente visualizando uma versão simplificada do conteúdo. Visualizar a versão completa com formatação.
Pessoal boa tarde!

Pessoal eu acabei de instalar o debian squeeze no notebook acer, e fora a demora de entrar no sistema ele não da a opção de entrar no ruindows.

[email protected]:/home/alex# fdisk -l

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xde119d3b

Dispositivo Boot Start End Blocks Id System
/dev/sda1 1 10199 81922048 7 HPFS ou NTFS
/dev/sda2 10200 27852 141797722+ 7 HPFS ou NTFS
/dev/sda3 27853 27974 979965 5 Estendida
/dev/sda4 * 27975 30401 19494877+ 83 Linux
/dev/sda5 27853 27974 979933+ 82 Linux swap / Solaris


Automatically added by lilo postinst script
large-memory

[b]# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# --------------- `install-mbr(8)', `/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.

# +---------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes to this |
# | conffile, `/boot/bootmess.txt' (if you have created it), or |
# | install a new kernel. The computer will most likely fail to |
# | boot if a kernel-image post-install script or you don't |
# | remember to run `lilo'. |
# | |
# +---------------------------------------------------------------+

# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/sda

# Specifies the device that should be mounted as root. (`/')
#
root=/dev/sda4

# This option may be needed for some software RAID installs.
#
# raid-extra-boot=mbr-only

# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller. Using `compact' is especially recommended when
# booting from a floppy disk. It is disabled here by default
# because it doesn't always work.
#
# compact

# Installs the specified file as the new boot sector
# You have the choice between: text, bmp, and menu
# Look in lilo.conf(5) manpage for details
#
#install=menu

# Specifies the location of the map file
#
map=/boot/map

# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration. If a
# command line is given, other than one specified by an `append'
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well. Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000

# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20

# You can put a customized boot message up if you like. If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress. `single-key' goes with the `alias' lines in the
# `image' configurations below. eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
# prompt
# delay=100
# timeout=100

# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>)
#
# vga=ask
# vga=9
#
Kernel command line options that apply to all installed images go
# here. See: The `boot-prompt-HOWTO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""

# If you used a serial console to install Debian, this option should be
# enabled by default.
# serial=

#
# Boot up Linux by default.
#
default=Linux

image=/vmlinuz
label=Linux
read-only
# restricted
# alias=1

initrd=/initrd.img

image=/vmlinuz.old
label=LinuxOLD
read-only
optional
# restricted
# alias=2

initrd=/initrd.img.old


# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
#
# other=/dev/hda4
# label=HURD
# restricted
# alias=3
other=/dev/sda1
label=Windows
# restricted
# alias=2

[/b]

como faço uma configuração para bootar a opção ruinwdos?
O lilo já acrescentou isso pra você, no finalzinho do arquivo está especificado para inicializar /dev/sda1 (que provavelmente é onde o windows está instalado). Não aparece a palavra windows na inicialização do lilo?
URL de Referência