Fala galera,
sou novo no linux e mais ainda no Debian. Entretanto eu instalei-o msmo assim.
Mas o problema é que após a instalação, algumas coisinhas tipo:
o clique do mouse pelo touch pad, wireless e alguma outra coisa que eu não deva ter percebido não foram instaladas ainda!

Logo, peço a ajuda de vocês. Como eu não sei mta coisa ainda, eu não poderei adiantar muito sobre o problema.

Obrigado desde já, com Deus ae!

---

o que posso adiantar sobre o wireless é o seguinte:


# lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:40:a7:23:3a:c7
inet addr:192.168.1.58 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:a7ff:fe23:3ac7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22778 errors:0 dropped:0 overruns:0 frame:0
TX packets:18071 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:27593335 (26.3 MiB) TX bytes:2470735 (2.3 MiB)
Interrupt:28

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1700 (1.6 KiB) TX bytes:1700 (1.6 KiB)

pan0 Link encap:Ethernet HWaddr d6:47:f2:eb:f8:f5
inet6 addr: fe80::d447:f2ff:feeb:f8f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:3164 (3.0 KiB)

Obs.: estava com o Ubuntu e o wireless estava funcionando perfeitamente!

Olá Amigo..

Em relação ao touch pad tive o mesmo problema...resolvi conforme este tutorial..

http://www.vivaolinux.com.br/dica/Gerenc...e-TouchPad

Veja se consegue....os amigos do fórum podem falar mais sobre isso e a wireless...veja lá consegue

Abraços..

posta a saida do "lspci -v"

O touch pad esta funcionando perfeitamente, obrigado pela ajuda!


00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features

00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f7e0a000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+

00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at f7e08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: CLEVO/KAPOK Computer Device 4140
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: CLEVO/KAPOK Computer Device 4140
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7c00000-f7cfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: CLEVO/KAPOK Computer Device 4140
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7e07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f060 [size=32]
Memory at f7e06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: medium devsel, IRQ 18
Memory at f7e05000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]

02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 9196
Flags: bus master, fast devsel, latency 0, IRQ 3
I/O ports at e000 [size=256]
Memory at f7d00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-91-81-fe-ff-4c-e0-00

03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f7c20000 (32-bit, non-prefetchable) [size=16K]
I/O ports at d100 [size=128]
I/O ports at d000 [size=256]
Memory at f7c10000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f7c00000 [disabled] [size=64K]
Capabilities: [68] Power Management version 3
Capabilities: [50] Express Legacy Endpoint, MSI 00
Capabilities: [40] MSI-X: Enable- Count=8 Masked-
Capabilities: [70] MSI: Enable+ Count=1/8 Maskable+ 64bit+
Capabilities: [100] Device Serial Number c7-3a-23-ff-ff-a7-40-00
Kernel driver in use: jme

03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f7c26000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [100] Device Serial Number c7-3a-23-ff-ff-a7-40-00

03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f7c25000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [100] Device Serial Number c7-3a-23-ff-ff-a7-40-00
Kernel driver in use: sdhci-pci

03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 4140
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f7c24000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [100] Device Serial Number c7-3a-23-ff-ff-a7-40-00

instala o firmware-realtek , talvez tenha q instalar uma versão nova do firmware

# aptitude install firmware-realtek
Couldn't find any package whose name or description matched "firmware-realtek"
Couldn't find any package whose name or description matched "firmware-realtek"
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.

Eu estou tentando instalar o drive da placa de video...
eu acho que o meu modelo é esse : RTL8188CE
Logo, baixei o drive, mas como eu faço para instala-lo agora?

Obrigado pela ajuda funakoshi

em /etc/apt/source.list
adcione os reps "contrib" e "non-free" na sourcelist
vai ficar tipo:
deb http://ftp.debian.org/debian/ squeeze main contrib non-free

caso necessario troque squeeze pelo no sa versão que tu usa

de um update antes de tentar baixar o driver. bom tmbm é instalar o "wicd" é um gerenciador d conexão
a wiki tmbm aconcelha a instalar o "wireless-tools"

Coloca esta linhas abaixo no seu source.list depois executa o comando aptitude update e depois aptitude install firmware-realtek

deb http://ftp.br.debian.org/debian stable main contrib non-free
deb-src http://ftp.br.debian.org/debian stable main contrib non-free

Então eu fiz o que vcs falaram acima, mas msmo assim não deu certo!
Eu baixei o drive e mandei abri-lo pelo terminal.
Olhem o que deu, talvez saibam me ajudar:


[email protected]:/home/lucas# cd /home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011
[email protected]:/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011# make install
make -C /lib/modules/2.6.32-5-amd64/build M=/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64'
/usr/src/linux-headers-2.6.32-5-common/arch/x86/Makefile:81: stack protector enabled but no compiler support
CC [M] /home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.o
In file included from /home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:32:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/wifi.h: In function ‘rtl_find_sta’:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/wifi.h:2094: warning: passing argument 1 of ‘ieee80211_find_sta’ from incompatible pointer type
/usr/src/linux-headers-2.6.32-5-common/include/net/mac80211.h:2091: note: expected ‘struct ieee80211_hw *’ but argument is of type ‘struct ieee80211_vif *’
In file included from /home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:34:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.h: At top level:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.h:143: warning: ‘enum ieee80211_smps_mode’ declared inside parameter list
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.h:143: warning: its scope is only this definition or declaration, which is probably not what you want
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: In function ‘_rtl_init_mac80211’:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:322: error: ‘IEEE80211_HW_CONNECTION_MONITOR’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:322: error: (Each undeclared identifier is reported only once
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:322: error: for each function it appears in.)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: In function ‘rtl_tx_agg_start’:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:991: warning: passing argument 1 of ‘ieee80211_start_tx_ba_cb_irqsafe’ from incompatible pointer type
/usr/src/linux-headers-2.6.32-5-common/include/net/mac80211.h:2038: note: expected ‘struct ieee80211_hw *’ but argument is of type ‘struct ieee80211_vif *’
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: In function ‘rtl_tx_agg_stop’:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1020: warning: passing argument 1 of ‘ieee80211_stop_tx_ba_cb_irqsafe’ from incompatible pointer type
/usr/src/linux-headers-2.6.32-5-common/include/net/mac80211.h:2079: note: expected ‘struct ieee80211_hw *’ but argument is of type ‘struct ieee80211_vif *’
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: In function ‘rtl_watchdog_wq_callback’:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1274: error: implicit declaration of function ‘ieee80211_connection_loss’
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: At top level:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1332: warning: ‘enum ieee80211_smps_mode’ declared inside parameter list
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1332: error: parameter 2 (‘smps’) has incomplete type
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: In function ‘rtl_make_smps_action’:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1352: error: ‘WLAN_HT_ACTION_SMPS’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1354: error: ‘IEEE80211_SMPS_AUTOMATIC’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1355: error: ‘IEEE80211_SMPS_NUM_MODES’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1357: error: ‘IEEE80211_SMPS_OFF’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1359: error: ‘WLAN_HT_SMPS_CONTROL_DISABLED’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1361: error: ‘IEEE80211_SMPS_STATIC’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1363: error: ‘WLAN_HT_SMPS_CONTROL_STATIC’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1365: error: ‘IEEE80211_SMPS_DYNAMIC’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1367: error: ‘WLAN_HT_SMPS_CONTROL_DYNAMIC’ undeclared (first use in this function)
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: At top level:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1376: warning: ‘enum ieee80211_smps_mode’ declared inside parameter list
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1376: error: parameter 3 (‘smps’) has incomplete type
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: In function ‘rtl_send_smps_action’:
/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:1404: error: type of formal parameter 2 is incomplete
make[4]: *** [/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.o] Error 1
make[3]: *** [_module_/home/lucas/Desktop/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011] Error 2
make[2]: *** [sub-make] Error 2
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64'
make: *** [all] Error 2

colocar o conteudo do seu arquivo sources.list aqui para vermos, o seu processador é um amd64? o sistema foi instalado nesta versão ao na de 32 bit?

Fala Lucas...vc não conseguiu, ainda..???

Se não deu certo ainda...tenta fazer esse passo do wiki...do fórum !!

NDISwrapper...pega o driver do wireless...e instala com o NDISwrapper..

Segue esses links..ve o installation e a parte do Configuration..

http://wiki.debian.org/NdisWrapper#ndis


Vê se ajuda....qualquer coisa volta aí...

OBS..Ahaa...se estiver errado por favor pessoal do fórum ..me corrigem....grato !!

Tenta-lá garoto..qualquer coisa tamo ai..

Abraços..

description: CPU
product: Intel® Core™
vendor: Intel Corp.
physical id: 31
bus info: [email protected]
version: 6.10.7
slot: SOCKET 0
size: 800MHz
capacity: 800MHz
width: 64 bits
clock: 100MHz

Kernel Linux 2.6.32-5-amd64

---

Opaaa.
Brigadão sandrofunk, darei uma olhada sim nesse link que me passou.
É ainda não consegui não, mas desistir jamais hahaha.

Fala Galera,
Consegui resolver o problema!
Graças a Deus!!!
Achei esse link que explica tudo certinho.
http://souinfra.blogspot.com.br/2012/06/...altek.html

Obs: para instalar o linux headers, eu utilizei um outro link:
http://www2.joinville.udesc.br/~colmeia/...dreamlinux

Obrigado a cada um que ajudou-me!
Fiquem com Deus e até +.

Legal, Lucas Borelli...

Se precisar estamos ai..

Abraços..