Responder 
 
Avaliação do Tópico:
  • 0 Votos - 0 Média
  • 1
  • 2
  • 3
  • 4
  • 5
USB Reiniciando
23/04/2018, 15:26
Resposta: #1
USB Reiniciando
Boa tarde pessoal

Faz um tempinho que eu sou usuário do Debian, mas vira e mexe no meu notebook ele tem a característica de ficar reiniciando as conexões USB. Exemplo, se você tá com um teclado externo, as 3 luzes do teclado pisca, como se você tivesse religado o mesmo. Lembrando que ele faz isso com todas as USBs da máquina. Alguém teve alguma problema assim e conseguiu resolver ? Eu nem ligava muito, mas, atualmente uso um pendrive USB criptografado que toda vez que acontece isso ele não monta mais o a partição criptografada, no caso tenho que ficar reiniciando ele, é agora tá começando a incomodar. Se alguém que já passou por isso já conseguiu resolver poder dar uma dica, agradeço muito.

Abraço

Ademilson Souza
---------------------------------
PC: Notebook Avell Titanium G1513
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
29/04/2018, 13:50
Resposta: #2
RE: USB Reiniciando
Olá,

Acho que seria uma boa olhar as mensagens de log e principalmente do dmesg, deve ter alguma pista.
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
14/06/2018, 11:31
Resposta: #3
RE: USB Reiniciando
Então, não reparei nada de anormal no dmesg

Se tiver alguma dica, agradeço.
Abraço

"
~$ sudo dmesg
[ 0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27
[ 0.000000] Linux version 4.9.0-6-amd64 ([email protected]) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=44deb460-f444-4374-adde-f301aa4dec32 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b972cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b972d000-0x00000000b9733fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9734000-0x00000000b9f11fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9f12000-0x00000000ba19dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba19e000-0x00000000c95b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c95b6000-0x00000000c9a63fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9a64000-0x00000000c9a96fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9a97000-0x00000000c9b7cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c9b7d000-0x00000000c9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000062fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Notebook W350STQ/W370ST /W350STQ/W370ST , BIOS 4.6.5 06/14/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x62fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7E00000000 write-back
[ 0.000000] 2 base 0600000000 mask 7FC0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CE000000 mask 7FFE000000 uncachable
[ 0.000000] 6 base 00CD000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 0630000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 062FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8fef000fd7f0]
[ 0.000000] Base memory trampoline at [ffff8fef00097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x42d739000, 0x42d739fff] PGTABLE
[ 0.000000] BRK [0x42d73a000, 0x42d73afff] PGTABLE
[ 0.000000] BRK [0x42d73b000, 0x42d73bfff] PGTABLE
[ 0.000000] BRK [0x42d73c000, 0x42d73cfff] PGTABLE
[ 0.000000] BRK [0x42d73d000, 0x42d73dfff] PGTABLE
[ 0.000000] BRK [0x42d73e000, 0x42d73efff] PGTABLE
[ 0.000000] BRK [0x42d73f000, 0x42d73ffff] PGTABLE
[ 0.000000] BRK [0x42d740000, 0x42d740fff] PGTABLE
[ 0.000000] BRK [0x42d741000, 0x42d741fff] PGTABLE
[ 0.000000] BRK [0x42d742000, 0x42d742fff] PGTABLE
[ 0.000000] BRK [0x42d743000, 0x42d743fff] PGTABLE
[ 0.000000] BRK [0x42d744000, 0x42d744fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34f85000-0x367b9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000C9B1F088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9B2C340 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9B1F1B8 00D182 (v02 ALASKA A M I 00000021 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000C9B7B080 000040
[ 0.000000] ACPI: APIC 0x00000000C9B2C450 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9B2C4E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000C9B2C530 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000C9B2C5D8 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9B2D570 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C9B2DAB0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000C9B2E588 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C9B2E5C8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9B2E600 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9B2E918 001640 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9B2FF58 000E64 (v01 SgRef SgPeg 00001000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000C9B30DC0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C9B30E78 0015B3 (v01 OptRef OptTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000062fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x62fdfa000-0x62fdfefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000062fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b972cfff]
[ 0.000000] node 0: [mem 0x00000000b9734000-0x00000000b9f11fff]
[ 0.000000] node 0: [mem 0x00000000ba19e000-0x00000000c95b5fff]
[ 0.000000] node 0: [mem 0x00000000c9a64000-0x00000000c9a96fff]
[ 0.000000] node 0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000062fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000062fdfffff]
[ 0.000000] On node 0 totalpages: 6263027
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12814 pages used for memmap
[ 0.000000] DMA32 zone: 820055 pages, LIFO batch:31
[ 0.000000] Normal zone: 84984 pages used for memmap
[ 0.000000] Normal zone: 5438976 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cd200000-0x00000000cf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb972d000-0xb9733fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9f12000-0xba19dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc95b6000-0xc9a63fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9a97000-0xc9b7cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9b7d000-0xc9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xccffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8ff52fa00000 s105304 r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 6165144
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=44deb460-f444-4374-adde-f301aa4dec32 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24551216K/25052108K available (6240K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 500892K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.949 MHz processor
[ 0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.89 BogoMIPS (lpj=10775796)
[ 0.000020] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20160831
[ 0.006537] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.006573] Security Framework initialized
[ 0.006574] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.006577] AppArmor: AppArmor disabled by boot time parameter
[ 0.007685] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.011920] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013780] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.013800] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.014072] CPU: Physical Processor ID: 0
[ 0.014072] CPU: Processor Core ID: 0
[ 0.014075] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014076] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.014079] mce: CPU supports 9 MCE banks
[ 0.014085] CPU0: Thermal monitoring enabled (TM1)
[ 0.014096] process: using mwait in idle threads
[ 0.014099] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.014099] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.014100] Spectre V2 : Mitigation: Full generic retpoline
[ 0.014812] Freeing SMP alternatives memory: 24K
[ 0.034503] ftrace: allocating 25239 entries in 99 pages
[ 0.050361] smpboot: Max logical packages: 2
[ 0.050364] DMAR: Host address width 39
[ 0.050365] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.050372] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.050373] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.050375] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.050376] DMAR: RMRR base: 0x000000c9726000 end: 0x000000c9732fff
[ 0.050377] DMAR: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
[ 0.050379] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.050379] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.050380] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.050606] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.050607] x2apic enabled
[ 0.050611] Switched APIC routing to cluster x2apic.
[ 0.051003] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090691] TSC deadline timer enabled
[ 0.090694] smpboot: CPU0: Intel® Core™ i7-4800MQ CPU @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.090696] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.090735] ... version: 3
[ 0.090735] ... bit width: 48
[ 0.090735] ... generic registers: 4
[ 0.090736] ... value mask: 0000ffffffffffff
[ 0.090736] ... max period: 00007fffffffffff
[ 0.090737] ... fixed-purpose events: 3
[ 0.090737] ... event mask: 000000070000000f
[ 0.091197] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.091275] x86: Booting SMP configuration:
[ 0.091276] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.110661] x86: Booted up 1 node, 8 CPUs
[ 0.110663] smpboot: Total of 8 processors activated (43103.18 BogoMIPS)
[ 0.116649] devtmpfs: initialized
[ 0.116698] x86/mm: Memory block size: 128MB
[ 0.119518] PM: Registering ACPI NVS region [mem 0xb972d000-0xb9733fff] (28672 bytes)
[ 0.119519] PM: Registering ACPI NVS region [mem 0xc9a97000-0xc9b7cfff] (942080 bytes)
[ 0.119580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.119590] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.119633] pinctrl core: initialized pinctrl subsystem
[ 0.119716] NET: Registered protocol family 16
[ 0.132189] cpuidle: using governor ladder
[ 0.156211] cpuidle: using governor menu
[ 0.156229] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.156230] ACPI: bus type PCI registered
[ 0.156231] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.156289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.156290] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.156296] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.156347] PCI: Using configuration type 1 for base access
[ 0.156391] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.172317] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.172317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.172524] ACPI: Added _OSI(Module Device)
[ 0.172525] ACPI: Added _OSI(Processor Device)
[ 0.172526] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.172526] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.172683] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.176078] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.176546] ACPI: Dynamic OEM Table Load:
[ 0.176550] ACPI: SSDT 0xFFFF8FF5134D1400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.176862] ACPI: Dynamic OEM Table Load:
[ 0.176866] ACPI: SSDT 0xFFFF8FF513646000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.177202] ACPI: Dynamic OEM Table Load:
[ 0.177205] ACPI: SSDT 0xFFFF8FF5136C5A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.178519] ACPI : EC: EC started
[ 0.178520] ACPI : EC: interrupt blocked
[ 0.178801] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.178802] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.178803] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.178804] ACPI: Interpreter enabled
[ 0.178824] ACPI: (supports S0 S3 S4 S5)
[ 0.178824] ACPI: Using IOAPIC for interrupt routing
[ 0.178843] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.184783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.184786] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.184907] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.185004] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.185005] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.185304] PCI host bridge to bus 0000:00
[ 0.185306] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.185307] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.185308] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.185308] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.185309] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.185310] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.185311] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.185312] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.185313] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.185314] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.185315] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.185321] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.185390] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.185417] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.185462] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.185493] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.185500] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.185505] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.185508] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.185575] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.185581] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[ 0.185667] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.185681] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.185732] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.185766] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.185795] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.185810] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1f000-0xf7a1f00f 64bit]
[ 0.185862] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.185928] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.185943] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[ 0.186016] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.186060] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.186090] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.186104] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.186162] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.186198] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.186227] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.186281] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.186347] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.186377] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.186431] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.186494] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.186523] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.186578] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.186640] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.186675] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.186690] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[ 0.186764] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.186808] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.186839] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.186984] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.186995] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.187001] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.187006] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.187012] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.187018] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.187024] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[ 0.187053] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.187110] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.187122] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[ 0.187139] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.187243] pci 0000:01:00.0: [10de:11e2] type 00 class 0x030200
[ 0.187250] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.187256] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.187263] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.187268] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.187272] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.187358] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.196242] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.196244] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.196246] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.196248] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.196306] acpiphp: Slot [1] registered
[ 0.196310] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.196396] pci 0000:03:00.0: [10ec:8723] type 00 class 0x028000
[ 0.196427] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.196472] pci 0000:03:00.0: reg 0x18: [mem 0xf7900000-0xf7903fff 64bit]
[ 0.196640] pci 0000:03:00.0: supports D1 D2
[ 0.196641] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196702] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.208259] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.208261] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.208264] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.208330] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.208348] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf780ffff]
[ 0.208484] pci 0000:04:00.0: supports D1 D2
[ 0.208486] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.208525] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.208567] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
[ 0.208585] pci 0000:04:00.2: reg 0x10: [io 0xc000-0xc0ff]
[ 0.208612] pci 0000:04:00.2: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.208629] pci 0000:04:00.2: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.208707] pci 0000:04:00.2: supports D1 D2
[ 0.208708] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220266] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.220269] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.220271] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.220275] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.220943] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.220985] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.221028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.221069] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.221109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.221150] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.221190] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.221230] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.221466] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.221513] ACPI : EC: interrupt unblocked
[ 0.221516] ACPI : EC: event unblocked
[ 0.221529] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.221531] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.221594] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.221595] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.221596] vgaarb: loaded
[ 0.221597] vgaarb: bridge control possible 0000:00:02.0
[ 0.221645] PCI: Using ACPI for IRQ routing
[ 0.222913] PCI: pci_cache_line_size set to 64 bytes
[ 0.222952] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.222953] e820: reserve RAM buffer [mem 0xb972d000-0xbbffffff]
[ 0.222954] e820: reserve RAM buffer [mem 0xb9f12000-0xbbffffff]
[ 0.222955] e820: reserve RAM buffer [mem 0xc95b6000-0xcbffffff]
[ 0.222956] e820: reserve RAM buffer [mem 0xc9a97000-0xcbffffff]
[ 0.222956] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[ 0.222957] e820: reserve RAM buffer [mem 0x62fe00000-0x62fffffff]
[ 0.223056] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.223060] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.225076] clocksource: Switched to clocksource hpet
[ 0.229717] VFS: Disk quotas dquot_6.6.0
[ 0.229732] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.229785] pnp: PnP ACPI init
[ 0.229836] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.229838] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.229952] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.229953] system 00:01: [io 0xffff] has been reserved
[ 0.229954] system 00:01: [io 0xffff] has been reserved
[ 0.229955] system 00:01: [io 0xffff] has been reserved
[ 0.229956] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.229957] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.229958] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.229959] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.229960] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.229962] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.229963] system 00:01: [io 0x3322-0x3323] has been reserved
[ 0.229964] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229980] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.230017] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.230019] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.230038] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.230075] pnp 00:05: Plug and Play ACPI device, IDs STLc033 PNP0f13 (active)
[ 0.230131] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.230133] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230443] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.230444] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.230446] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.230447] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.230448] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.230450] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.230451] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.230452] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.230453] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.230454] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.230456] system 00:07: [mem 0xf7ffe000-0xf7ffefff] has been reserved
[ 0.230457] system 00:07: [mem 0xf7fe0000-0xf7fe0fff] has been reserved
[ 0.230458] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230616] pnp: PnP ACPI: found 8 devices
[ 0.236212] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.236234] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.236236] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.236238] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.236240] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.236243] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.236251] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.236252] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.236255] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.236261] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.236263] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.236266] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.236268] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.236273] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.236274] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.236275] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.236276] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.236277] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.236278] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.236279] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.236279] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.236280] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.236281] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[ 0.236282] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.236283] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.236284] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.236285] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.236286] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.236287] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.236288] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.236289] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.236374] NET: Registered protocol family 2
[ 0.236542] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.236768] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.236864] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.236887] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.236948] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.237034] NET: Registered protocol family 1
[ 0.237043] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.237397] PCI: CLS 64 bytes, default 64
[ 0.237428] Unpacking initramfs...
[ 0.543135] Freeing initrd memory: 24788K
[ 0.543172] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.543174] software IO TLB [mem 0xc55b6000-0xc95b6000] (64MB) mapped at [ffff8fefc55b6000-ffff8fefc95b5fff]
[ 0.543457] audit: initializing netlink subsys (disabled)
[ 0.543468] audit: type=2000 audit(1528985522.528:1): initialized
[ 0.543756] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.543804] zbud: loaded
[ 0.544366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.544388] io scheduler noop registered
[ 0.544388] io scheduler deadline registered
[ 0.544396] io scheduler cfq registered (default)
[ 0.544840] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.544844] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.544856] intel_idle: MWAIT substates: 0x42120
[ 0.544856] intel_idle: v0.4.1 model 0x3C
[ 0.545130] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.545299] GHES: HEST is not enabled!
[ 0.545343] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.545672] Linux agpgart interface v0.103
[ 0.545724] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 0.545724] AMD IOMMUv2 functionality not available on this system
[ 0.546151] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SENM] at 0x60,0x64 irq 1,12
[ 0.549790] i8042: Detected active multiplexing controller, rev 1.1
[ 0.552022] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.552025] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.552044] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.552059] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.552075] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.552210] mousedev: PS/2 mouse device common for all mice
[ 0.552299] rtc_cmos 00:02: RTC can wake from S4
[ 0.552420] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.552453] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.552459] intel_pstate: Intel P-state driver initializing
[ 0.552822] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.553701] NET: Registered protocol family 10
[ 0.554296] mip6: Mobile IPv6
[ 0.554300] NET: Registered protocol family 17
[ 0.554305] mpls_gso: MPLS GSO support
[ 0.555136] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.555610] microcode: sig=0x306c3, pf=0x10, revision=0x22
[ 0.555939] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[ 0.556258] registered taskstats version 1
[ 0.556302] zswap: loaded using pool lzo/zbud
[ 0.556646] ima: No TPM chip found, activating TPM-bypass!
[ 0.557772] rtc_cmos 00:02: setting system clock to 2018-06-14 14:12:02 UTC (1528985522)
[ 0.557951] PM: Hibernation image not present or could not be loaded.
[ 0.560933] Freeing unused kernel memory: 1416K
[ 0.560935] Write protecting the kernel read-only data: 12288k
[ 0.562094] Freeing unused kernel memory: 1936K
[ 0.568902] Freeing unused kernel memory: 1228K
[ 0.582306] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.633911] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.633964] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.633970] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.633978] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.634575] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.634601] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.635447] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.635456] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.635485] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.635516] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.651005] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 0.651009] ACPI: Power Button [PWRB]
[ 0.651062] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 0.651064] ACPI: Sleep Button [SLPB]
[ 0.651159] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[ 0.651204] ACPI: Lid Switch [LID0]
[ 0.651270] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 0.651272] ACPI: Power Button [PWRF]
[ 0.657372] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.657373] ACPI: Thermal Zone [TZ0] (46 C)
[ 0.659254] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27
[ 0.659570] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.659577] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 0.659951] ACPI: bus type USB registered
[ 0.659972] usbcore: registered new interface driver usbfs
[ 0.659982] usbcore: registered new interface driver hub
[ 0.660008] usbcore: registered new device driver usb
[ 0.660324] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffb3624315d000, 00:90:f5:e9:92:53, XID 08800800 IRQ 28
[ 0.660325] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.660657] [drm] Initialized
[ 0.661523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.661584] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 0.661612] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.661899] ehci-pci: EHCI PCI platform driver
[ 0.662502] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.662507] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.662518] ehci-pci 0000:00:1a.0: debug port 2
[ 0.663361] SCSI subsystem initialized
[ 0.665184] libata version 3.00 loaded.
[ 0.666409] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.666505] AVX2 version of gcm_enc/dec engaged.
[ 0.666506] AES CTR mode by8 optimization enabled
[ 0.666812] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[ 0.679701] r8169 0000:04:00.2 enp4s0f2: renamed from eth0
[ 0.685089] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.685129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.685131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.685132] usb usb1: Product: EHCI Host Controller
[ 0.685134] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[ 0.685136] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.685258] hub 1-0:1.0: USB hub found
[ 0.685262] hub 1-0:1.0: 2 ports detected
[ 0.685479] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.685483] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.685493] ehci-pci 0000:00:1d.0: debug port 2
[ 0.689385] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.689396] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[ 0.705147] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.705208] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.705209] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.705211] usb usb2: Product: EHCI Host Controller
[ 0.705212] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[ 0.705214] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.705431] hub 2-0:1.0: USB hub found
[ 0.705435] hub 2-0:1.0: 2 ports detected
[ 0.705693] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.705698] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.706773] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.706777] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.706949] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.706950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.706952] usb usb3: Product: xHCI Host Controller
[ 0.706953] usb usb3: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
[ 0.706954] usb usb3: SerialNumber: 0000:00:14.0
[ 0.707063] hub 3-0:1.0: USB hub found
[ 0.707098] hub 3-0:1.0: 14 ports detected
[ 0.708151] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.708154] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.708297] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.708299] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.708300] usb usb4: Product: xHCI Host Controller
[ 0.708301] usb usb4: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
[ 0.708302] usb usb4: SerialNumber: 0000:00:14.0
[ 0.708448] hub 4-0:1.0: USB hub found
[ 0.708474] hub 4-0:1.0: 6 ports detected
[ 0.708928] ahci 0000:00:1f.2: version 3.0
[ 0.709073] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.709101] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 0.709103] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
[ 0.749745] scsi host0: ahci
[ 0.749927] scsi host1: ahci
[ 0.750088] scsi host2: ahci
[ 0.750202] scsi host3: ahci
[ 0.750286] scsi host4: ahci
[ 0.750360] scsi host5: ahci
[ 0.750396] ata1: SATA max UDMA/133 abar [email protected] port 0xf7a1a100 irq 30
[ 0.750397] ata2: SATA max UDMA/133 abar [email protected] port 0xf7a1a180 irq 30
[ 0.750399] ata3: SATA max UDMA/133 abar [email protected] port 0xf7a1a200 irq 30
[ 0.750399] ata4: DUMMY
[ 0.750401] ata5: SATA max UDMA/133 abar [email protected] port 0xf7a1a300 irq 30
[ 0.750401] ata6: DUMMY
[ 0.750636] [drm] Memory usable by graphics device = 2048M
[ 0.750637] [drm] Replacing VGA console driver
[ 0.751175] Console: switching to colour dummy device 80x25
[ 0.757107] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.757107] [drm] Driver supports precise vblank timestamp query.
[ 0.759348] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.798487] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 0.798507] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 0.798629] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4f/LNXVIDEO:00/input/input11
[ 0.798673] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.798802] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 0.798819] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 0.886828] fbcon: inteldrmfb (fb0) is primary device
[ 1.013084] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.033058] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.033098] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.053554] usb 4-2: New USB device found, idVendor=04e8, idProduct=61b6
[ 1.053555] usb 4-2: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[ 1.053556] usb 4-2: Product: Samsung M3 Portable
[ 1.053557] usb 4-2: Manufacturer: JMicron
[ 1.053557] usb 4-2: SerialNumber: 00000000011E0BD8
[ 1.053981] usb 4-2: Enable of device-initiated U1 failed.
[ 1.054139] usb 4-2: Enable of device-initiated U2 failed.
[ 1.063489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.063820] ata1.00: ATA-9: SanDisk SDSSDP128G, 2.0.0, max UDMA/133
[ 1.063821] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.064181] ata1.00: configured for UDMA/133
[ 1.064436] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP12 0 PQ: 0 ANSI: 5
[ 1.113256] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 1.113328] scsi host6: usb-storage 4-2:1.0
[ 1.113397] usbcore: registered new interface driver usb-storage
[ 1.113733] usbcore: registered new interface driver uas
[ 1.173048] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 1.181456] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.181457] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.181734] hub 2-1:1.0: USB hub found
[ 1.181816] hub 2-1:1.0: 8 ports detected
[ 1.201314] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.201315] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.201478] hub 1-1:1.0: USB hub found
[ 1.201578] hub 1-1:1.0: 6 ports detected
[ 1.325541] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610
[ 1.325542] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.325543] usb 3-3: Product: USB2.0 Hub
[ 1.325543] usb 3-3: Manufacturer: GenesysLogic
[ 1.327077] hub 3-3:1.0: USB hub found
[ 1.328708] hub 3-3:1.0: 4 ports detected
[ 1.437204] usb 4-3: new SuperSpeed USB device number 3 using xhci_hcd
[ 1.460835] usb 4-3: New USB device found, idVendor=05e3, idProduct=0612
[ 1.460837] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.460838] usb 4-3: Product: USB3.0 Hub
[ 1.460840] usb 4-3: Manufacturer: GenesysLogic
[ 1.461912] hub 4-3:1.0: USB hub found
[ 1.462302] hub 4-3:1.0: 4 ports detected
[ 1.543766] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.545052] ata2.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[ 1.545053] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.546404] ata2.00: configured for UDMA/133
[ 1.546643] scsi 1:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[ 1.565908] random: fast init done
[ 1.570814] tsc: Refined TSC clocksource calibration: 2693.761 MHz
[ 1.570821] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d438c619d, max_idle_ns: 440795237946 ns
[ 1.577057] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[ 1.715171] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 1.718104] usb 3-7: New USB device found, idVendor=0bda, idProduct=8723
[ 1.718107] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.718109] usb 3-7: Product: RT Bluetooth Radio
[ 1.718111] usb 3-7: Manufacturer: Realtek
[ 1.718113] usb 3-7: SerialNumber: 00e04c000001
[ 1.797012] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd
[ 1.857284] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 1.893015] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 1.897810] usb 3-3.2: New USB device found, idVendor=0781, idProduct=5571
[ 1.897811] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.897812] usb 3-3.2: Product: Cruzer Fit
[ 1.897813] usb 3-3.2: Manufacturer: SanDisk
[ 1.897814] usb 3-3.2: SerialNumber: 4C530013020725106071
[ 1.898216] usb-storage 3-3.2:1.0: USB Mass Storage device detected
[ 1.898290] scsi host7: usb-storage 3-3.2:1.0
[ 2.007937] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.011844] ata3.00: ATAPI: Slimtype DVD A DS8A9SH, EX12, max UDMA/100
[ 2.012660] ata3.00: configured for UDMA/100
[ 2.017005] usb 3-11: new full-speed USB device number 5 using xhci_hcd
[ 2.020056] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A9SH EX12 PQ: 0 ANSI: 5
[ 2.127306] scsi 6:0:0:0: Direct-Access Samsung M3 Portable 3 PQ: 0 ANSI: 6
[ 2.157682] usb 3-11: New USB device found, idVendor=147e, idProduct=1002
[ 2.157683] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.157684] usb 3-11: Product: TouchStrip Fingerprint Sensor
[ 2.157684] usb 3-11: Manufacturer: UPEK
[ 2.166311] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.166402] sd 0:0:0:0: [sda] Write Protect is off
[ 2.166404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.166430] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.166434] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.166435] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.166489] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.166491] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.166510] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.166595] sd 6:0:0:0: [sdc] 1953504688 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.166792] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.166794] sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00
[ 2.166945] sda: sda1
[ 2.166991] sd 6:0:0:0: [sdc] No Caching mode page found
[ 2.166992] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.167198] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.197830] sdb: sdb1 sdb2 < sdb5 >
[ 2.198450] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.236968] usb 3-3.4: new full-speed USB device number 6 using xhci_hcd
[ 2.339109] usb 3-3.4: New USB device found, idVendor=062a, idProduct=4c01
[ 2.339111] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.339112] usb 3-3.4: Product: 2.4G Keyboard Mouse
[ 2.339114] usb 3-3.4: Manufacturer: MOSART Semi.
[ 2.347871] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.395664] hidraw: raw HID events driver © Jiri Kosina
[ 2.398714] usbcore: registered new interface driver usbhid
[ 2.398715] usbhid: USB HID core driver
[ 2.399162] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:062A:4C01.0001/input/input17
[ 2.510656] hid-generic 0003:062A:4C01.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-3.4/input0
[ 2.510931] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.1/0003:062A:4C01.0002/input/input18
[ 2.540038] sdc: sdc1
[ 2.540847] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.569192] hid-generic 0003:062A:4C01.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-3.4/input1
[ 2.625071] clocksource: Switched to clocksource tsc
[ 2.921271] scsi 7:0:0:0: Direct-Access SanDisk Cruzer Fit 1.27 PQ: 0 ANSI: 6
[ 2.972645] sd 7:0:0:0: [sdd] 125031680 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.972915] sd 7:0:0:0: [sdd] Write Protect is off
[ 2.972920] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 2.973185] sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.975050] sdd: sdd1
[ 2.976086] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 3.001161] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 3.105242] Console: switching to colour frame buffer device 240x67
[ 3.125171] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.144788] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 3.165471] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.165473] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.165585] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.181021] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input16
[ 3.449480] PM: Starting manual resume from disk
[ 3.449482] PM: Hibernation image partition 8:17 present
[ 3.449483] PM: Looking for hibernation image.
[ 3.449591] PM: Image not found (code -22)
[ 3.449592] PM: Hibernation image not present or could not be loaded.
[ 3.541799] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.808587] ip_tables: © 2000-2006 Netfilter Core Team
[ 3.833868] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.834057] systemd[1]: Detected architecture x86-64.
[ 3.834411] systemd[1]: Set hostname to <bixeira>.
[ 3.975405] systemd[1]: smbd.service: Cannot add dependency job, ignoring: Unit smbd.service is masked.
[ 3.975418] systemd[1]: nmbd.service: Cannot add dependency job, ignoring: Unit nmbd.service is masked.
[ 3.975850] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.975884] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.975903] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.975926] systemd[1]: Listening on Journal Socket.
[ 3.975935] systemd[1]: Reached target Remote File Systems.
[ 4.012427] random: crng init done
[ 4.037547] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.039260] lp: driver loaded but no devices found
[ 4.046794] ppdev: user-space parallel port driver
[ 4.054719] systemd-journald[319]: Received request to flush runtime journal from PID 1
[ 4.240128] ACPI: AC Adapter [AC] (on-line)
[ 4.240630] ACPI: Battery Slot [BAT0] (battery absent)
[ 4.249669] wmi: Mapper loaded
[ 4.263491] input: PC Speaker as /devices/platform/pcspkr/input/input19
[ 4.317168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.318706] EDAC MC: Ver: 3.0.0
[ 4.318748] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 4.318749] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.318750] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.318750] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.318751] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.319930] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.319973] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.320005] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 4.320056] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 4.320352] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 4.321770] EDAC ie31200: No ECC support
[ 4.352322] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.369393] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[ 4.369395] snd_hda_codec_via hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.369396] snd_hda_codec_via hdaudioC1D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[ 4.369397] snd_hda_codec_via hdaudioC1D0: mono: mono_out=0x0
[ 4.369398] snd_hda_codec_via hdaudioC1D0: dig-out=0x2d/0x0
[ 4.369398] snd_hda_codec_via hdaudioC1D0: inputs:
[ 4.369400] snd_hda_codec_via hdaudioC1D0: Mic=0x2b
[ 4.369401] snd_hda_codec_via hdaudioC1D0: Internal Mic=0x29
[ 4.377726] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 4.378333] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 4.378399] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[ 4.398722] Bluetooth: Core ver 2.22
[ 4.398735] NET: Registered protocol family 31
[ 4.398735] Bluetooth: HCI device and connection manager initialized
[ 4.398738] Bluetooth: HCI socket layer initialized
[ 4.398740] Bluetooth: L2CAP socket layer initialized
[ 4.398744] Bluetooth: SCO socket layer initialized
[ 4.399025] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 4.399092] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 4.399143] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[ 4.416841] usbcore: registered new interface driver btusb
[ 4.417884] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[ 4.417885] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin
[ 4.421859] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723a_fw.bin
[ 4.429489] intel_rapl: Found RAPL domain package
[ 4.429491] intel_rapl: Found RAPL domain core
[ 4.429492] intel_rapl: Found RAPL domain uncore
[ 4.429494] intel_rapl: Found RAPL domain dram
[ 4.432730] iTCO_vendor_support: vendor-support=0
[ 4.433367] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.433404] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.434169] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.449764] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[ 4.451822] rtl8723ae 0000:03:00.0: firmware: direct-loading firmware rtlwifi/rtl8723fw_B.bin
[ 4.453020] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 4.453181] rtlwifi: rtlwifi: wireless switch is on
[ 4.492476] rtl8723ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 4.622084] Adding 29295612k swap on /dev/sdb1. Priority:-1 extents:1 across:29295612k FS
[ 4.866247] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.354304] vboxdrv: loading out-of-tree module taints kernel.
[ 5.359412] vboxdrv: Found 8 processor cores
[ 5.376861] vboxdrv: TSC mode is Invariant, tentative frequency 2693760071 Hz
[ 5.376862] vboxdrv: Successfully loaded version 5.2.8 (interface 0x00290001)
[ 5.403828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.403829] Bluetooth: BNEP filters: protocol multicast
[ 5.403833] Bluetooth: BNEP socket layer initialized
[ 5.412910] bbswitch: version 0.8
[ 5.412914] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 5.412919] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 5.412927] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 5.412997] bbswitch: detected an Optimus _DSM function
[ 5.413043] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 5.413446] bbswitch: disabling discrete graphics
[ 5.413450] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 5.639911] VBoxNetFlt: Successfully started.
[ 5.649972] VBoxNetAdp: Successfully started.
[ 5.681454] VBoxPciLinuxInit
[ 5.683456] vboxpci: IOMMU not found (not registered)
[ 6.014461] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[ 6.017052] r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
[ 6.091638] r8169 0000:04:00.2 enp4s0f2: link down
[ 6.091640] r8169 0000:04:00.2 enp4s0f2: link down
[ 6.091688] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[ 6.101607] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7.706179] r8169 0000:04:00.2 enp4s0f2: link up
[ 7.706186] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f2: link becomes ready
[ 7.939469] Bluetooth: RFCOMM TTY layer initialized
[ 7.939472] Bluetooth: RFCOMM socket layer initialized
[ 7.939476] Bluetooth: RFCOMM ver 1.11
[ 13.091148] /dev/vmmon[1278]: Module vmmon: registered with major=10 minor=165
[ 13.091151] /dev/vmmon[1278]: Using tsc_khz as TSC frequency: 2693761
[ 13.091152] /dev/vmmon[1278]: Module vmmon: initialized
[ 13.103500] Guest personality initialized and is inactive
[ 13.103538] VMCI host device registered (name=vmci, major=10, minor=54)
[ 13.103538] Initialized host personality
[ 13.123655] NET: Registered protocol family 40
[ 13.141780] fuse init (API version 7.26)
[ 13.280209] /dev/vmnet: open called by PID 1627 (vmnet-bridge)
[ 13.280213] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 13.280228] /dev/vmnet: port on hub 0 successfully opened
[ 13.280233] bridge-enp4s0f2: up
[ 13.280237] bridge-enp4s0f2: attached
[ 14.297767] /dev/vmnet: open called by PID 1635 (vmnet-netifup)
[ 14.297779] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 14.297821] /dev/vmnet: port on hub 1 successfully opened
[ 14.329179] /dev/vmnet: open called by PID 1643 (vmnet-dhcpd)
[ 14.329187] /dev/vmnet: port on hub 1 successfully opened
[ 14.340485] /dev/vmnet: open called by PID 1652 (vmnet-natd)
[ 14.340492] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 14.340509] /dev/vmnet: port on hub 8 successfully opened
[ 14.341872] userif-3: sent link down event.
[ 14.341874] userif-3: sent link up event.
[ 14.343025] /dev/vmnet: open called by PID 1653 (vmnet-netifup)
[ 14.343031] /dev/vmnet: port on hub 8 successfully opened
[ 14.353421] /dev/vmnet: open called by PID 1657 (vmnet-dhcpd)
[ 14.353438] /dev/vmnet: port on hub 8 successfully opened
[ 20.421528] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 34.566757] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[ 34.566769] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66002106 00000200 00000000 00000000 00000000
[ 64.453396] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[ 64.453408] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66002106 00000200 00000000 00000000 00000000
[ 94.680686] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[ 94.680700] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66002106 00000200 00000000 00000000 00000000
[ 94.680701] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 663.132046] /dev/vmmon[4499]: PTSC: initialized at 2693761000 Hz using TSC, TSCs are synchronized.
[ 663.253441] /dev/vmmon[4499]: Monitor IPI vector: ff
[ 663.253443] /dev/vmmon[4499]: HV IPI vector: f2
[ 663.867689] /dev/vmnet: open called by PID 4534 (vmx-vcpu-0)
[ 663.867699] device enp4s0f2 entered promiscuous mode
[ 663.867779] bridge-enp4s0f2: enabled promiscuous mode
[ 663.867781] /dev/vmnet: port on hub 0 successfully opened
[ 663.868189] /dev/vmnet: open called by PID 4534 (vmx-vcpu-0)
[ 663.868199] /dev/vmnet: port on hub 0 successfully opened
[ 663.869572] /dev/vmnet: open called by PID 4534 (vmx-vcpu-0)
[ 663.869579] /dev/vmnet: port on hub 8 successfully opened
[ 663.869584] /dev/vmnet: open called by PID 4534 (vmx-vcpu-0)
[ 663.869586] /dev/vmnet: port on hub 8 successfully opened
"

Ademilson Souza
---------------------------------
PC: Notebook Avell Titanium G1513
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
Responder 


Ir ao Fórum:


Usuários visualizando este tópico: 2 Visitantes

Entre em Contato | Fórum Debian | Voltar ao Topo | Voltar ao Conteúdo | Modo Leve (Arquivo) | Feeds RSS