Responder 
 
Avaliação do Tópico:
  • 0 Votos - 0 Média
  • 1
  • 2
  • 3
  • 4
  • 5
Problema: o debian 6 cai do nada
08/02/2011, 13:31
Resposta: #1
Problema: o debian 6 cai do nada
Olá!

Após 1 dia utilizando a nova versão do Debian (squeeze) vem acontecendo dele cair, ou seja, eu estava navegando na net e do nada ele pula para uma tela preta, congelada e os leds do notebook ficam piscando.

Assim eu preciso forçar o desligamento.
Tenho impressão que isso ocorre quando estou conectado via wireless mas não sei se tem a ver.
Meu notebook é um vaio vgn-fw550f.

Alguem pode me ajudar?
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
09/02/2011, 13:53
Resposta: #2
Re: Problema: o debian 6 cai do nada
Olá,

Você atualizou também o kernel ou gerenciador de conexões wireless? Dê um olhada em /var/log/syslog e com o comando dmesg após a inicialização ou quando ocorrerem erros para tentarmos identificar o que está ocorrendo.
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
09/02/2011, 15:33
Resposta: #3
Re: Problema: o debian 6 cai do nada
Eu não lembro exatamente onde está, mas existe uma opção sobre desligar a rede se ociosa. Dê uma procurada e desabilite, talvez isso esteja causando algum tipo de problema. Outra coisa, como está programado o seu gerenciamento de energia?

"Vamos tirar a barriga, senhor Barba? Digo..."

Debian Jessie | Usuário #517613
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
11/03/2011, 16:51
Resposta: #4
Re: Problema: o debian 6 cai do nada
hax0r3x, eu tive um problema muito parecido com o seu, quando instala o debian e navegava na internet pela rede cabeada funcionava de boa, quando usava a wireless, passa um tempo e o note ficava com a tela preta e os leds piscando, andei vendo uns logs e notei uma busca insessante pela rede no network-manager, removi o mesmo e instalei o wicd. Resolveu meu problema!!!

Espero ter ajudado!
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
21/03/2011, 18:27
Resposta: #5
Re: Problema: o debian 6 cai do nada
Olá, desculpem pela demora.
Eu resolvi instalar através do netinstall, já faz uma semana que não tem acontecido nada de errado.
Então se houve problema novamente eu volto a postar.

Obrigado.
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
20/10/2011, 22:34 (Resposta editada pela última vez em: 20/10/2011 22:36 por hax0r3x.)
Resposta: #6
RE: Problema: o debian 6 cai do nada
Olá!

Formatei meu notebook, instalei a versão 6.0.3 (kernel 2.6.32-5-amd64) e voltei a ter o problema que eu tinha antigamente, o Debian congela do nada, então preciso forçar a reinicialização apertando o power.

Tenho impressão que ocorre quando estou conectado pela wireless ou deve ser por causa do driver de video (o qual já tem um tópico pra questão).

segue meu dmesg
Código:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-38) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 03:59:20 UTC 2011
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=622148fb-f32e-4dd2-8e72-1d1d3988bc9d ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdea3000 (usable)
[    0.000000]  BIOS-e820: 00000000bdea3000 - 00000000bdecb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdecb000 - 00000000bdedc000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdedc000 - 00000000bdedd000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdedd000 - 00000000bdf04000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf04000 - 00000000bdf05000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdf05000 - 00000000bdf06000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf06000 - 00000000bdf12000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdf12000 - 00000000bdf18000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdf18000 - 00000000bdf37000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf37000 - 00000000be000000 (usable)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000be000000
[    0.000000]  0000000000 - 00be000000 page 2M
[    0.000000] kernel direct mapping tables up to be000000 @ 10000-14000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ 12000-18000
[    0.000000] RAMDISK: 3771a000 - 37fef313
[    0.000000] ACPI: RSDP 00000000000f03b0 00024 (v02   Sony)
[    0.000000] ACPI: XSDT 00000000bdf10f10 0005C (v01   Sony     VAIO 20090904 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000bdf04a90 000F4 (v04   Sony     VAIO 20090904 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BDF17E40/00000000BDF17D40, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT 00000000bdf06010 084F8 (v01   Sony     VAIO 20090904 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bdf17e40 00040
[    0.000000] ACPI: APIC 00000000bdf0ff10 0006C (v02   Sony     VAIO 20090904 MSFT 00010013)
[    0.000000] ACPI: MCFG 00000000bdf16c90 0003C (v01   Sony     VAIO 20090904 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bdf16c10 00038 (v01   Sony     VAIO 20090904 MSFT 00010013)
[    0.000000] ACPI: SLIC 00000000bdf12c10 00176 (v01   Sony     VAIO 20090904 Sony 01000000)
[    0.000000] ACPI: SSDT 00000000bdedc590 00505 (v01   Sony     VAIO 20090904 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000bdec7c10 002E4 (v01   Sony     VAIO 20090904 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [0000000000013000 - 000000000001afff]
[    0.000000]   bootmap [000000000001b000 -  0000000000042fff] pages 28
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 000168a594]    TEXT DATA BSS ==> [0001000000 - 000168a594]
[    0.000000]   #3 [003771a000 - 0037fef313]          RAMDISK ==> [003771a000 - 0037fef313]
[    0.000000]   #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
[    0.000000]   #5 [000168b000 - 000168b1fc]              BRK ==> [000168b000 - 000168b1fc]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
[    0.000000] found SMP MP-table at [ffff8800000fd690] fd690
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000bdea3
[    0.000000]     0: 0x000bdf37 -> 0x000be000
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1040119
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 106 pages reserved
[    0.000000]   DMA zone: 3817 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 759716 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bdea3000 - 00000000bdecb000
[    0.000000] PM: Registered nosave memory: 00000000bdecb000 - 00000000bdedc000
[    0.000000] PM: Registered nosave memory: 00000000bdedc000 - 00000000bdedd000
[    0.000000] PM: Registered nosave memory: 00000000bdedd000 - 00000000bdf04000
[    0.000000] PM: Registered nosave memory: 00000000bdf04000 - 00000000bdf05000
[    0.000000] PM: Registered nosave memory: 00000000bdf05000 - 00000000bdf06000
[    0.000000] PM: Registered nosave memory: 00000000bdf06000 - 00000000bdf12000
[    0.000000] PM: Registered nosave memory: 00000000bdf12000 - 00000000bdf18000
[    0.000000] PM: Registered nosave memory: 00000000bdf18000 - 00000000bdf37000
[    0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffa00000
[    0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at be000000 (gap: be000000:22000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005200000 s90328 r8192 d24360 u524288
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1022093
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=622148fb-f32e-4dd2-8e72-1d1d3988bc9d ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff88000539e000 - ffff88000939e000
[    0.000000] software IO TLB at phys 0x539e000 - 0x939e000
[    0.000000] Memory: 4020524k/5242880k available (3081k kernel code, 1082404k absent, 139952k reserved, 1889k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2526.258 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5052.51 BogoMIPS (lpj=10105032)
[    0.004024] Security Framework initialized
[    0.004028] SELinux:  Disabled at boot.
[    0.004327] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009700] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010641] Mount-cache hash table entries: 256
[    0.010783] Initializing cgroup subsys ns
[    0.010787] Initializing cgroup subsys cpuacct
[    0.010790] Initializing cgroup subsys devices
[    0.010792] Initializing cgroup subsys freezer
[    0.010794] Initializing cgroup subsys net_cls
[    0.010819] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010821] CPU: L2 cache: 3072K
[    0.010824] CPU 0/0x0 -> Node 0
[    0.010825] CPU: Physical Processor ID: 0
[    0.010826] CPU: Processor Core ID: 0
[    0.010829] mce: CPU supports 6 MCE banks
[    0.010836] CPU0: Thermal monitoring enabled (TM2)
[    0.010841] using mwait in idle threads.
[    0.010842] Performance Events: Core2 events, Intel PMU driver.
[    0.010847] ... version:                2
[    0.010848] ... bit width:              40
[    0.010849] ... generic registers:      2
[    0.010851] ... value mask:             000000ffffffffff
[    0.010852] ... max period:             000000007fffffff
[    0.010853] ... fixed-purpose events:   3
[    0.010855] ... event mask:             0000000700000003
[    0.011779] ACPI: Core revision 20090903
[    0.024065] Setting APIC routing to flat
[    0.024318] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.067050] CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
[    0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 3072K
[    0.008000] CPU 1/0x1 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.152104] CPU1: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
[    0.152110] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.156018] Brought up 2 CPUs
[    0.156020] Total of 2 processors activated (10105.19 BogoMIPS).
[    0.157042] CPU0 attaching sched-domain:
[    0.157046]  domain 0: span 0-1 level MC
[    0.157047]   groups: group ffff88000520fbf0 cpus 0 group ffff88000528fbf0 cpus 1
[    0.157053] CPU1 attaching sched-domain:
[    0.157055]  domain 0: span 0-1 level MC
[    0.157056]   groups: group ffff88000528fbf0 cpus 1 group ffff88000520fbf0 cpus 0
[    0.157108] devtmpfs: initialized
[    0.160021] regulator: core version 0.5
[    0.160062] NET: Registered protocol family 16
[    0.160147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160150] ACPI: bus type pci registered
[    0.160215] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.160217] PCI: MCFG area at e0000000 reserved in E820
[    0.173708] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.173710] PCI: Using configuration type 1 for base access
[    0.174006] bio: create slab <bio-0> at 0
[    0.174006] ACPI: EC: Look up EC in DSDT
[    0.174006] ACPI: Executed 1 blocks of module-level executable AML code
[    0.178473] ACPI: BIOS _OSI(Linux) query ignored
[    0.188159] ACPI: Interpreter enabled
[    0.188161] ACPI: (supports S0 S3 S4 S5)
[    0.188181] ACPI: Using IOAPIC for interrupt routing
[    0.194104] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    0.224454] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.224760] ACPI: No dock devices found.
[    0.225254] _OSC invalid UUID
[    0.225256] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.225303] DMAR: Forcing write-buffer flush capability
[    0.225304] DMAR: Disabling IOMMU for graphics on this chipset
[    0.225350] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.225352] pci 0000:00:01.0: PME# disabled
[    0.225431] pci 0000:00:1a.0: reg 20 io port: [0xe0e0-0xe0ff]
[    0.225511] pci 0000:00:1a.1: reg 20 io port: [0xe0c0-0xe0df]
[    0.225589] pci 0000:00:1a.2: reg 20 io port: [0xe0a0-0xe0bf]
[    0.225671] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd5204c00-0xd5204fff]
[    0.225732] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.225736] pci 0000:00:1a.7: PME# disabled
[    0.225782] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd5200000-0xd5203fff]
[    0.225830] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.225833] pci 0000:00:1b.0: PME# disabled
[    0.225905] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.225908] pci 0000:00:1c.0: PME# disabled
[    0.225982] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.225986] pci 0000:00:1c.1: PME# disabled
[    0.226061] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.226064] pci 0000:00:1c.3: PME# disabled
[    0.226139] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.226142] pci 0000:00:1c.4: PME# disabled
[    0.226206] pci 0000:00:1d.0: reg 20 io port: [0xe080-0xe09f]
[    0.226285] pci 0000:00:1d.1: reg 20 io port: [0xe060-0xe07f]
[    0.226363] pci 0000:00:1d.2: reg 20 io port: [0xe040-0xe05f]
[    0.226445] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd5204800-0xd5204bff]
[    0.226506] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.226511] pci 0000:00:1d.7: PME# disabled
[    0.226714] pci 0000:00:1f.2: reg 10 io port: [0xe130-0xe137]
[    0.226720] pci 0000:00:1f.2: reg 14 io port: [0xe120-0xe123]
[    0.226726] pci 0000:00:1f.2: reg 18 io port: [0xe110-0xe117]
[    0.226732] pci 0000:00:1f.2: reg 1c io port: [0xe100-0xe103]
[    0.226738] pci 0000:00:1f.2: reg 20 io port: [0xe020-0xe03f]
[    0.226744] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd5204000-0xd52047ff]
[    0.226780] pci 0000:00:1f.2: PME# supported from D3hot
[    0.226783] pci 0000:00:1f.2: PME# disabled
[    0.226816] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd5205000-0xd52050ff]
[    0.226830] pci 0000:00:1f.3: reg 20 io port: [0xe000-0xe01f]
[    0.226885] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.226893] pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff]
[    0.226900] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0020000-0xd002ffff]
[    0.226922] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd0000000-0xd001ffff]
[    0.226949] pci 0000:01:00.0: supports D1 D2
[    0.226990] pci 0000:01:00.1: reg 10 32bit mmio: [0xd0030000-0xd0033fff]
[    0.227047] pci 0000:01:00.1: supports D1 D2
[    0.227118] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.227121] pci 0000:00:01.0: bridge 32bit mmio: [0xc0000000-0xd00fffff]
[    0.228018] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[    0.228022] pci 0000:00:1c.0: bridge 32bit mmio: [0xd3d00000-0xd50fffff]
[    0.228071] pci 0000:00:1c.1: bridge io port: [0xb000-0xbfff]
[    0.228075] pci 0000:00:1c.1: bridge 32bit mmio: [0xd2900000-0xd3cfffff]
[    0.228157] pci 0000:06:00.0: reg 10 64bit mmio: [0xd1500000-0xd1501fff]
[    0.228257] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.228263] pci 0000:06:00.0: PME# disabled
[    0.228347] pci 0000:00:1c.3: bridge io port: [0xa000-0xafff]
[    0.228350] pci 0000:00:1c.3: bridge 32bit mmio: [0xd1500000-0xd28fffff]
[    0.228734] pci 0000:08:00.0: reg 10 64bit mmio: [0xd0120000-0xd0123fff]
[    0.228785] pci 0000:08:00.0: reg 18 io port: [0x9000-0x90ff]
[    0.228940] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xd0100000-0xd011ffff]
[    0.229273] pci 0000:08:00.0: supports D1 D2
[    0.229275] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.229300] pci 0000:08:00.0: PME# disabled
[    0.229535] pci 0000:00:1c.4: bridge io port: [0x9000-0x9fff]
[    0.229539] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0100000-0xd14fffff]
[    0.229585] pci 0000:0a:03.0: reg 10 32bit mmio: [0xd5100000-0xd51007ff]
[    0.229635] pci 0000:0a:03.0: PME# supported from D0 D3hot D3cold
[    0.229640] pci 0000:0a:03.0: PME# disabled
[    0.229676] pci 0000:0a:03.1: reg 10 32bit mmio: [0xd5100900-0xd51009ff]
[    0.229728] pci 0000:0a:03.1: supports D1 D2
[    0.229729] pci 0000:0a:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.229733] pci 0000:0a:03.1: PME# disabled
[    0.229770] pci 0000:0a:03.2: reg 10 32bit mmio: [0xd5100800-0xd51008ff]
[    0.229821] pci 0000:0a:03.2: supports D1 D2
[    0.229822] pci 0000:0a:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.229827] pci 0000:0a:03.2: PME# disabled
[    0.229885] pci 0000:00:1e.0: transparent bridge
[    0.229891] pci 0000:00:1e.0: bridge 32bit mmio: [0xd5100000-0xd51fffff]
[    0.229925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.230082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.230169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.230218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.230280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.230351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.230414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.230691] _OSC invalid UUID
[    0.244562] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.244660] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.244757] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.244853] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[    0.244949] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.245046] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.245141] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[    0.245237] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.245326] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.245331] vgaarb: loaded
[    0.245343] PCI: Using ACPI for IRQ routing
[    0.245343] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.245343] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.245343] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.248016] Switching to clocksource tsc
[    0.249066] pnp: PnP ACPI init
[    0.249072] ACPI: bus type pnp registered
[    0.265035] pnp: PnP ACPI: found 10 devices
[    0.265036] ACPI: ACPI bus type pnp unregistered
[    0.265046] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.265051] system 00:05: ioport range 0x680-0x69f has been reserved
[    0.265053] system 00:05: ioport range 0x1000-0x100f has been reserved
[    0.265056] system 00:05: ioport range 0x800-0x803 has been reserved
[    0.265058] system 00:05: ioport range 0x400-0x47f has been reserved
[    0.265061] system 00:05: ioport range 0x500-0x53f has been reserved
[    0.265063] system 00:05: ioport range 0x164e-0x164f has been reserved
[    0.265069] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.265071] system 00:09: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.265074] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.265076] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.265078] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    0.265081] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.265083] system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved
[    0.265086] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.269813] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.269815] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.269818] pci 0000:00:01.0:   MEM window: 0xc0000000-0xd00fffff
[    0.269821] pci 0000:00:01.0:   PREFETCH window: 0x000000d5300000-0x000000d54fffff
[    0.269825] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.269828] pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
[    0.269833] pci 0000:00:1c.0:   MEM window: 0xd3d00000-0xd50fffff
[    0.269837] pci 0000:00:1c.0:   PREFETCH window: 0x000000d5500000-0x000000d56fffff
[    0.269843] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.269846] pci 0000:00:1c.1:   IO window: 0xb000-0xbfff
[    0.269851] pci 0000:00:1c.1:   MEM window: 0xd2900000-0xd3cfffff
[    0.269855] pci 0000:00:1c.1:   PREFETCH window: 0x000000d5700000-0x000000d58fffff
[    0.269861] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[    0.269864] pci 0000:00:1c.3:   IO window: 0xa000-0xafff
[    0.269868] pci 0000:00:1c.3:   MEM window: 0xd1500000-0xd28fffff
[    0.269872] pci 0000:00:1c.3:   PREFETCH window: 0x000000d5900000-0x000000d5afffff
[    0.269878] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
[    0.269881] pci 0000:00:1c.4:   IO window: 0x9000-0x9fff
[    0.269886] pci 0000:00:1c.4:   MEM window: 0xd0100000-0xd14fffff
[    0.269890] pci 0000:00:1c.4:   PREFETCH window: 0x000000d5b00000-0x000000d5cfffff
[    0.269896] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[    0.269898] pci 0000:00:1e.0:   IO window: disabled
[    0.269903] pci 0000:00:1e.0:   MEM window: 0xd5100000-0xd51fffff
[    0.269906] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.269916]   alloc irq_desc for 16 on node -1
[    0.269918]   alloc kstat_irqs on node -1
[    0.269923] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.269926] pci 0000:00:01.0: setting latency timer to 64
[    0.269933]   alloc irq_desc for 17 on node -1
[    0.269934]   alloc kstat_irqs on node -1
[    0.269937] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.269941] pci 0000:00:1c.0: setting latency timer to 64
[    0.269949] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.269953] pci 0000:00:1c.1: setting latency timer to 64
[    0.269961]   alloc irq_desc for 19 on node -1
[    0.269962]   alloc kstat_irqs on node -1
[    0.269965] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.269969] pci 0000:00:1c.3: setting latency timer to 64
[    0.269977] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.269981] pci 0000:00:1c.4: setting latency timer to 64
[    0.269987] pci 0000:00:1e.0: setting latency timer to 64
[    0.269991] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.269993] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.269995] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.269997] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xd00fffff]
[    0.269999] pci_bus 0000:01: resource 2 pref mem [0xd5300000-0xd54fffff]
[    0.270001] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.270003] pci_bus 0000:02: resource 1 mem: [0xd3d00000-0xd50fffff]
[    0.270005] pci_bus 0000:02: resource 2 pref mem [0xd5500000-0xd56fffff]
[    0.270007] pci_bus 0000:04: resource 0 io:  [0xb000-0xbfff]
[    0.270009] pci_bus 0000:04: resource 1 mem: [0xd2900000-0xd3cfffff]
[    0.270011] pci_bus 0000:04: resource 2 pref mem [0xd5700000-0xd58fffff]
[    0.270013] pci_bus 0000:06: resource 0 io:  [0xa000-0xafff]
[    0.270014] pci_bus 0000:06: resource 1 mem: [0xd1500000-0xd28fffff]
[    0.270016] pci_bus 0000:06: resource 2 pref mem [0xd5900000-0xd5afffff]
[    0.270018] pci_bus 0000:08: resource 0 io:  [0x9000-0x9fff]
[    0.270020] pci_bus 0000:08: resource 1 mem: [0xd0100000-0xd14fffff]
[    0.270022] pci_bus 0000:08: resource 2 pref mem [0xd5b00000-0xd5cfffff]
[    0.270025] pci_bus 0000:0a: resource 1 mem: [0xd5100000-0xd51fffff]
[    0.270026] pci_bus 0000:0a: resource 3 io:  [0x00-0xffff]
[    0.270028] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.270052] NET: Registered protocol family 2
[    0.270186] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.271189] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.274829] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.275301] TCP: Hash tables configured (established 524288 bind 65536)
[    0.275303] TCP reno registered
[    0.275422] NET: Registered protocol family 1
[    0.275782] pci 0000:01:00.0: Boot video device
[    0.275838] Unpacking initramfs...
[    0.462293] Freeing initrd memory: 9044k freed
[    0.465960] audit: initializing netlink socket (disabled)
[    0.465974] type=2000 audit(1319143767.463:1): initialized
[    0.468828] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.470001] VFS: Disk quotas dquot_6.5.2
[    0.470043] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.470119] msgmni has been set to 7870
[    0.470285] alg: No test for stdrng (krng)
[    0.470324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.470327] io scheduler noop registered
[    0.470328] io scheduler anticipatory registered
[    0.470330] io scheduler deadline registered
[    0.470359] io scheduler cfq registered (default)
[    0.470461]   alloc irq_desc for 24 on node -1
[    0.470463]   alloc kstat_irqs on node -1
[    0.470472] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.470478] pcieport 0000:00:01.0: setting latency timer to 64
[    0.470577]   alloc irq_desc for 25 on node -1
[    0.470578]   alloc kstat_irqs on node -1
[    0.470586] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.470593] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.470715]   alloc irq_desc for 26 on node -1
[    0.470716]   alloc kstat_irqs on node -1
[    0.470723] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.470731] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.470848]   alloc irq_desc for 27 on node -1
[    0.470849]   alloc kstat_irqs on node -1
[    0.470856] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.470864] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.470983]   alloc irq_desc for 28 on node -1
[    0.470985]   alloc kstat_irqs on node -1
[    0.470993] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[    0.471001] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.472371] Linux agpgart interface v0.103
[    0.472419] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.472700] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.472749] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.477997] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.481697] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.481702] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.481704] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.481706] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.481709] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.481765] mice: PS/2 mouse device common for all mice
[    0.481798] rtc_cmos 00:06: RTC can wake from S4
[    0.481828] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.481855] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.481863] cpuidle: using governor ladder
[    0.481865] cpuidle: using governor menu
[    0.481868] No iBFT detected.
[    0.482134] TCP cubic registered
[    0.482221] NET: Registered protocol family 10
[    0.482807] Mobile IPv6
[    0.482810] NET: Registered protocol family 17
[    0.482876] PM: Resume from disk failed.
[    0.482884] registered taskstats version 1
[    0.483600] rtc_cmos 00:06: setting system clock to 2011-10-20 20:49:28 UTC (1319143768)
[    0.483654] Initalizing network drop monitor service
[    0.483674] Freeing unused kernel memory: 592k freed
[    0.483844] Write protecting the kernel read-only data: 4236k
[    0.495289] udev[56]: starting version 164
[    0.501276] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.592640] usbcore: registered new interface driver usbfs
[    0.592755] usbcore: registered new interface driver hub
[    0.592859] usbcore: registered new device driver usb
[    0.602837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.602869] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.603096] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.603099] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.603117] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.603172] ehci_hcd 0000:00:1a.7: debug port 1
[    0.603318] SCSI subsystem initialized
[    0.607063] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.607211] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd5204c00
[    0.614793] libata version 3.00 loaded.
[    0.619964] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.619984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.619987] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.619989] usb usb1: Product: EHCI Host Controller
[    0.619990] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    0.619992] usb usb1: SerialNumber: 0000:00:1a.7
[    0.620087] usb usb1: configuration #1 chosen from 1 choice
[    0.620136] hub 1-0:1.0: USB hub found
[    0.620145] hub 1-0:1.0: 6 ports detected
[    0.620196] ahci 0000:00:1f.2: version 3.0
[    0.620210] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.620251]   alloc irq_desc for 29 on node -1
[    0.620253]   alloc kstat_irqs on node -1
[    0.620263] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[    0.620311] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.620314] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[    0.620319] ahci 0000:00:1f.2: setting latency timer to 64
[    0.624472] sky2 driver version 1.28
[    0.624538] sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.624584] sky2 0000:08:00.0: setting latency timer to 64
[    0.624645] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
[    0.625176]   alloc irq_desc for 30 on node -1
[    0.625177]   alloc kstat_irqs on node -1
[    0.625230] sky2 0000:08:00.0: irq 30 for MSI/MSI-X
[    0.625883] sky2 eth0: addr 00:1d:ba:f9:43:14
[    0.627880] scsi0 : ahci
[    0.627998] scsi1 : ahci
[    0.628076] scsi2 : ahci
[    0.628154] scsi3 : ahci
[    0.628242] ata1: SATA max UDMA/133 abar [email protected] port 0xd5204100 irq 29
[    0.628245] ata2: SATA max UDMA/133 abar [email protected] port 0xd5204180 irq 29
[    0.628247] ata3: DUMMY
[    0.628248] ata4: DUMMY
[    0.628325]   alloc irq_desc for 23 on node -1
[    0.628328]   alloc kstat_irqs on node -1
[    0.628333] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.628352] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.628355] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.628366] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.628402] ehci_hcd 0000:00:1d.7: debug port 1
[    0.630811] uhci_hcd: USB Universal Host Controller Interface driver
[    0.630845] firewire_ohci 0000:0a:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.632006] sdhci: Secure Digital Host Controller Interface driver
[    0.632008] sdhci: Copyright(c) Pierre Ossman
[    0.632274] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.632287] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd5204800
[    0.647837] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.647853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.647855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.647857] usb usb2: Product: EHCI Host Controller
[    0.647859] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    0.647860] usb usb2: SerialNumber: 0000:00:1d.7
[    0.647927] usb usb2: configuration #1 chosen from 1 choice
[    0.647953] hub 2-0:1.0: USB hub found
[    0.647959] hub 2-0:1.0: 6 ports detected
[    0.648011] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.648051] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.648054] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.648061] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.648092] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
[    0.648121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.648123] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.648125] usb usb3: Product: UHCI Host Controller
[    0.648126] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.648128] usb usb3: SerialNumber: 0000:00:1a.0
[    0.648176] usb usb3: configuration #1 chosen from 1 choice
[    0.648200] hub 3-0:1.0: USB hub found
[    0.648205] hub 3-0:1.0: 2 ports detected
[    0.648245]   alloc irq_desc for 21 on node -1
[    0.648246]   alloc kstat_irqs on node -1
[    0.648251] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.648256] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.648259] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.648265] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.648293] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
[    0.648321] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.648323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.648325] usb usb4: Product: UHCI Host Controller
[    0.648326] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.648328] usb usb4: SerialNumber: 0000:00:1a.1
[    0.648375] usb usb4: configuration #1 chosen from 1 choice
[    0.648401] hub 4-0:1.0: USB hub found
[    0.648407] hub 4-0:1.0: 2 ports detected
[    0.648445] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.648451] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.648453] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.648459] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.648485] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
[    0.648511] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.648513] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.648515] usb usb5: Product: UHCI Host Controller
[    0.648516] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.648518] usb usb5: SerialNumber: 0000:00:1a.2
[    0.648562] usb usb5: configuration #1 chosen from 1 choice
[    0.648587] hub 5-0:1.0: USB hub found
[    0.648592] hub 5-0:1.0: 2 ports detected
[    0.648629] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.648635] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.648637] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.648643] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.648665] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
[    0.648692] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.648694] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.648696] usb usb6: Product: UHCI Host Controller
[    0.648698] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.648699] usb usb6: SerialNumber: 0000:00:1d.0
[    0.648744] usb usb6: configuration #1 chosen from 1 choice
[    0.648767] hub 6-0:1.0: USB hub found
[    0.648772] hub 6-0:1.0: 2 ports detected
[    0.648811] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.648816] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.648819] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.648825] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.648846] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
[    0.648873] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.648875] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.648877] usb usb7: Product: UHCI Host Controller
[    0.648879] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.648880] usb usb7: SerialNumber: 0000:00:1d.1
[    0.648927] usb usb7: configuration #1 chosen from 1 choice
[    0.648950] hub 7-0:1.0: USB hub found
[    0.648955] hub 7-0:1.0: 2 ports detected
[    0.648992]   alloc irq_desc for 18 on node -1
[    0.648994]   alloc kstat_irqs on node -1
[    0.648998] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.649003] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.649006] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.649012] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.649040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
[    0.649070] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.649072] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.649073] usb usb8: Product: UHCI Host Controller
[    0.649075] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.649077] usb usb8: SerialNumber: 0000:00:1d.2
[    0.649123] usb usb8: configuration #1 chosen from 1 choice
[    0.649147] hub 8-0:1.0: USB hub found
[    0.649152] hub 8-0:1.0: 2 ports detected
[    0.767966] firewire_ohci: Added fw-ohci device 0000:0a:03.0, OHCI version 1.0
[    0.875484] thermal LNXTHERM:01: registered as thermal_zone0
[    0.875490] ACPI: Thermal Zone [TZ00] (54 C)
[    0.876573] ACPI: Invalid active0 threshold
[    0.877178] thermal LNXTHERM:02: registered as thermal_zone1
[    0.877185] ACPI: Thermal Zone [TZ01] (54 C)
[    0.931967] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    0.947974] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.947992] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.948569] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.949352] ata2.00: ATAPI: MATSHITABD-CMB UJ140AS, 1.11, max UDMA/100
[    0.950812] ata2.00: configured for UDMA/100
[    1.015318] ata1.00: ATA-8: TOSHIBA MK3254GSY, LE001A, max UDMA/100
[    1.015320] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.016156] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.016160] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.016299] ata1.00: configured for UDMA/100
[    1.032093] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3254GS LE00 PQ: 0 ANSI: 5
[    1.033089] scsi 1:0:0:0: CD-ROM            MATSHITA BD-CMB UJ140AS   1.11 PQ: 0 ANSI: 5
[    1.034015] sdhci-pci 0000:0a:03.1: SDHCI controller found [1180:0822] (rev 22)
[    1.034032] sdhci-pci 0000:0a:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.034065] sdhci-pci 0000:0a:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.034104] Registered led device: mmc0::
[    1.034130] mmc0: SDHCI controller on PCI [0000:0a:03.1] using DMA
[    1.043398] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.043450] sd 0:0:0:0: [sda] Write Protect is off
[    1.043453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.043479] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.043602]  sda:sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.046588] Uniform CD-ROM driver Revision: 3.20
[    1.046657] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.068651] usb 1-2: New USB device found, idVendor=05ca, idProduct=183d
[    1.068654] usb 1-2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[    1.068656] usb 1-2: Manufacturer: Ricoh co. Ltd.
[    1.068717] usb 1-2: configuration #1 chosen from 1 choice
[    1.084297]  sda1 sda2 sda3 sda4
[    1.097615] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.101126] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.101159] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.268567] firewire_core: created device fw0: GUID 0800460303034022, S400
[    1.512806] PM: Starting manual resume from disk
[    1.512809] PM: Resume from partition 8:3
[    1.512810] PM: Checking hibernation image.
[    1.512968] PM: Error -22 checking image file
[    1.512970] PM: Resume from disk failed.
[    1.528558] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.528561] EXT4-fs (sda1): write access will be enabled during recovery
[    1.536020] usb 6-2: new full speed USB device using uhci_hcd and address 2
[    1.715752] usb 6-2: New USB device found, idVendor=1532, idProduct=0016
[    1.715755] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.715757] usb 6-2: Product: Razer DeathAdder
[    1.715759] usb 6-2: Manufacturer: Razer
[    1.715847] usb 6-2: configuration #1 chosen from 1 choice
[    1.719636] EXT4-fs (sda1): recovery complete
[    1.722293] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    1.725709] usbcore: registered new interface driver hiddev
[    1.729970] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2
[    1.730033] generic-usb 0003:1532:0016.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1d.0-2/input0
[    1.730054] usbcore: registered new interface driver usbhid
[    1.730056] usbhid: v2.6:USB HID core driver
[    1.956008] usb 8-1: new full speed USB device using uhci_hcd and address 2
[    2.132148] usb 8-1: New USB device found, idVendor=044e, idProduct=3017
[    2.132151] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.132153] usb 8-1: Product: BCM2046 Bluetooth Device
[    2.132154] usb 8-1: Manufacturer: Broadcom Corp
[    2.132156] usb 8-1: SerialNumber: 0026436F5EF9
[    2.132234] usb 8-1: configuration #1 chosen from 1 choice
[    3.092561] udev[455]: starting version 164
[    3.322691] ACPI: AC Adapter [ADP1] (on-line)
[    3.323637] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    3.324385] ACPI: Lid Switch [LID0]
[    3.324429] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    3.324436] ACPI: Power Button [PWRB]
[    3.346337] ACPI: SSDT 00000000bdee0c10 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    3.346800] ACPI: SSDT 00000000bdede710 00687 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    3.349901] Monitor-Mwait will be used to enter C-1 state
[    3.349971] Monitor-Mwait will be used to enter C-2 state
[    3.350724] Monitor-Mwait will be used to enter C-3 state
[    3.350728] Marking TSC unstable due to TSC halts in idle
[    3.350823] processor LNXCPU:00: registered as cooling_device0
[    3.351414] ACPI: SSDT 00000000bdedfd90 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
[    3.351728] ACPI: SSDT 00000000bdeddf90 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    3.353107] Switching to clocksource hpet
[    3.362675] processor LNXCPU:01: registered as cooling_device1
[    3.387649] ACPI: Battery Slot [BAT0] (battery present)
[    3.439803] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[    3.448532] acpi device:21: registered as cooling_device2
[    3.449593] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5
[    3.449601] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.456941] sony-laptop: Sony Notebook Control Driver v0.6.
[    3.467274] Bluetooth: Core ver 2.15
[    3.467313] NET: Registered protocol family 31
[    3.467314] Bluetooth: HCI device and connection manager initialized
[    3.467316] Bluetooth: HCI socket layer initialized
[    3.483535] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.485365] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7
[    3.485453] input: Sony Vaio Jogdial as /devices/virtual/input/input8
[    3.485493] sony-laptop: brightness ignored, must be controlled by ACPI video driver
[    3.490819] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    3.491383] usbcore: registered new interface driver btusb
[    3.572673] Linux video capture interface: v2.00
[    3.780733] [drm] Initialized drm 1.1.0 20060810
[    3.787511] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183d)
[    3.788784] input: UVC Camera (05ca:183d) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
[    3.788830] usbcore: registered new interface driver uvcvideo
[    3.788832] USB Video Class driver (v0.1.0)
[    3.912878] cfg80211: Using static regulatory domain info
[    3.912881] cfg80211: Regulatory domain: US
[    3.912882]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    3.912884]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    3.912887]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.912889]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.912891]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.912893]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.912896]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    3.912954] cfg80211: Calling CRDA for country: US
[    3.969052] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10
[    3.988136] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11
[    4.094043] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    4.094052] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    4.094057] ACPI: I/O resource 0000:00:1f.3 [0xe000-0xe01f] conflicts with ACPI region SMI1 [0x800-0xffff0803]
[    4.094119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.096512] [drm] radeon kernel modesetting enabled.
[    4.096545] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.096550] radeon 0000:01:00.0: setting latency timer to 64
[    4.098468] [drm] radeon: Initializing kernel modesetting.
[    4.098602] [drm] register mmio base: 0xD0020000
[    4.098603] [drm] register mmio size: 65536
[    4.098749] ATOM BIOS: Sony_M764_M96M2LP_gDDR3
[    4.098768] [drm] Clocks initialized !
[    4.099766] [drm] Detected VRAM RAM=256M, BAR=256M
[    4.099769] [drm] RAM width 128bits DDR
[    4.099841] [TTM] Zone  kernel: Available graphics memory: 2015082 kiB.
[    4.099857] [drm] radeon: 256M of VRAM memory ready
[    4.099859] [drm] radeon: 512M of GTT memory ready.
[    4.099922]   alloc irq_desc for 31 on node -1
[    4.099924]   alloc kstat_irqs on node -1
[    4.099937] radeon 0000:01:00.0: irq 31 for MSI/MSI-X
[    4.099944] radeon 0000:01:00.0: radeon: using MSI.
[    4.099976] [drm] radeon: irq initialized.
[    4.099978] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    4.100419] [drm] Loading RV730 Microcode
[    4.100422] platform radeon_cp.0: firmware: requesting radeon/RV730_pfp.bin
[    4.363884] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[    4.363887] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[    4.363951] iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.363959] iwlagn 0000:06:00.0: setting latency timer to 64
[    4.363994] iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[    4.386647]   alloc irq_desc for 22 on node -1
[    4.386649]   alloc kstat_irqs on node -1
[    4.386660] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    4.386713] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    4.400292] iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[    4.400346]   alloc irq_desc for 32 on node -1
[    4.400347]   alloc kstat_irqs on node -1
[    4.400363] iwlagn 0000:06:00.0: irq 32 for MSI/MSI-X
[    4.402397] r600_cp: Failed to load firmware "radeon/RV730_pfp.bin"
[    4.402458] [drm:rv770_startup] *ERROR* Failed to load firmware!
[    4.402512] radeon 0000:01:00.0: disabling GPU acceleration
[    4.417473] radeon 0000:01:00.0: ffff88013e2da000 unpin not necessary
[    4.417476] radeon 0000:01:00.0: ffff88013e2da000 unpin not necessary
[    4.417933] [drm] Radeon Display Connectors
[    4.417935] [drm] Connector 0:
[    4.417936] [drm]   LVDS
[    4.417937] [drm]   Encoders:
[    4.417938] [drm]     LCD1: INTERNAL_UNIPHY2
[    4.417939] [drm] Connector 1:
[    4.417940] [drm]   VGA
[    4.417942] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    4.417944] [drm]   Encoders:
[    4.417945] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.417946] [drm] Connector 2:
[    4.417947] [drm]   HDMI-A
[    4.417948] [drm]   HPD1
[    4.417950] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[    4.417951] [drm]   Encoders:
[    4.417952] [drm]     DFP1: INTERNAL_UNIPHY
[    4.448739] [drm] fb mappable at 0xC0040000
[    4.448741] [drm] vram apper at 0xC0000000
[    4.448742] [drm] size 5760000
[    4.448744] [drm] fb depth is 24
[    4.448745] [drm]    pitch is 6400
[    4.827473] phy0: Selected rate control algorithm 'iwl-agn-rs'
[    5.012711] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[    5.788151] Console: switching to colour frame buffer device 200x56
[    5.791588] fb0: radeondrmfb frame buffer device
[    5.791589] registered panic notifier
[    5.791628] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[    5.791676] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.791724] HDA Intel 0000:01:00.1: setting latency timer to 64
[    6.592712] Adding 2000084k swap on /dev/sda3.  Priority:-1 extents:1 across:2000084k
[    6.867134] loop: module loaded
[    9.204538] EXT4-fs (sda4): mounted filesystem with ordered data mode
[    9.997147] fuse init (API version 7.13)
[   11.447026] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[   12.001960] iwlagn 0000:06:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   12.019432] iwlagn 0000:06:00.0: loaded firmware version 8.24.2.12
[   12.160168] Registered led device: iwl-phy0::radio
[   12.160197] Registered led device: iwl-phy0::assoc
[   12.160216] Registered led device: iwl-phy0::RX
[   12.160235] Registered led device: iwl-phy0::TX
[   12.172852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.189112] sky2 eth0: enabling interface
[   12.189566] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.922832] Bluetooth: L2CAP ver 2.14
[   12.922834] Bluetooth: L2CAP socket layer initialized
[   12.941310] Bluetooth: RFCOMM TTY layer initialized
[   12.941317] Bluetooth: RFCOMM socket layer initialized
[   12.941318] Bluetooth: RFCOMM ver 1.11
[   13.023380] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.023382] Bluetooth: BNEP filters: protocol multicast
[   13.067582] Bridge firewalling registered
[   13.150040] Bluetooth: SCO (Voice Link) ver 0.6
[   13.150042] Bluetooth: SCO socket layer initialized
[   14.038435] lp: driver loaded but no devices found
[   14.110627] ppdev: user-space parallel port driver
[   20.552417] CPU0 attaching NULL sched-domain.
[   20.552421] CPU1 attaching NULL sched-domain.
[   20.587880] CPU0 attaching sched-domain:
[   20.587883]  domain 0: span 0-1 level MC
[   20.587885]   groups: group ffff88000520fbf0 cpus 0 group ffff88000528fbf0 cpus 1
[   20.587891] CPU1 attaching sched-domain:
[   20.587893]  domain 0: span 0-1 level MC
[   20.587895]   groups: group ffff88000528fbf0 cpus 1 group ffff88000520fbf0 cpus 0

sabem o que devo fazer?

abs
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
21/10/2011, 13:27
Resposta: #7
RE: Problema: o debian 6 cai do nada
pelo dmesg verifiquei o seguinte problema referente a firmware:
Código:
[    4.402397] r600_cp: Failed to load firmware "radeon/RV730_pfp.bin"
[    4.402458] [drm:rv770_startup] *ERROR* Failed to load firmware!

então procurei por 'RV730_pfp.bin' e vi que tem no pacote de firmware non-free.
logo instalei:
Código:
# aptitude install firmware-linux

reiniciei e não apareceu a mensagem de erro de firmware como antes.
e por enquanto não ocorreu mais de congelar o sistema Alegre
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
Responder 


Ir ao Fórum:


Usuários visualizando este tópico: 1 Visitantes

Entre em Contato | Fórum Debian | Voltar ao Topo | Voltar ao Conteúdo | Modo Leve (Arquivo) | Feeds RSS