Responder 
 
Avaliação do Tópico:
  • 0 Votos - 0 Média
  • 1
  • 2
  • 3
  • 4
  • 5
problema com modem SmartLink
26/10/2008, 19:17
Resposta: #1
problema com modem SmartLink
e ai pessoal
tenho o debian instalado a + ou - 1 mes e meio com dual boot com windows
no meu pc e to "brigando" com o meu modem da smartlink no debian (lenny para AMD64)
fui no site de pacotes do debian e baixei o seguinte pacote
"sl-modem-daemon (2.9.9d+e-pre2-12)"
so que na hora d rodar o dpkg para ele apareceu essa mensagem:

"Allowing use of questionable username.
The system user `Slmodemd' already exists. Exiting.
Only access through ALSA is available on amd64 but slamr driver was chosen!
Make sure that an ALSA driver for your chipset is available and is loaded
and that access to SmartLink modem components is supported by it.
invoke-rc.d: initscript sl-modem-daemon, action "start" failed
."


alguem pode me dizer do que se trata e como posso resolver sem
ter que usar a net porque net em ksa so consigo com o windows Triste ???
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
27/10/2008, 07:33
Resposta: #2
 
Bom dia,

Pela mensagem ele diz que o sl-modem-daemon já está instalado.
Faça isso :

dpkg -l | grep modem

Se na saída deste comando aparecer o sl-modem, ele já está instalado.

Até mais...

A melhor forma de aprendizado e aquela em que um grupo de pessoas, tentam ajudar umas as outras.
________________
Marcelo R. Silva
http://mrs-linux.blogspot.com
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
27/10/2008, 23:20
Resposta: #3
 
Bom dia vadinhodebian

Eu fiz conforme me disse e apareceu que ele esta instalado entaun o prob deve ser no comecar a rodar o modem ja que, apezar de instalado, o gnomeppp naun detecta de jeito nenhum... em alguns sites e a propia mensagem cita o ALSA.

Estranhei, pois pelo que eu saiba o ALSA "mexe" apenas com som.
Sabe algo sobre isso?????
Como ativar o modem por intermedio do ALSA ou sabe quem tenha essa informacao.

desculpem o essesso de "formalidade" na minha forma de relatar o problema e desde ja agradeco
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
28/10/2008, 19:17
Resposta: #4
 
Boa noite,

Poste aqui a saída do comando :

lspci | grep Modem

Até mais...

A melhor forma de aprendizado e aquela em que um grupo de pessoas, tentam ajudar umas as outras.
________________
Marcelo R. Silva
http://mrs-linux.blogspot.com
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
29/10/2008, 23:32
Resposta: #5
 
Boa noite,

fiz conforme me disse e apareceu isso:

00:0c.0 Modem: Smart Link Ltd. Unknown device 2800 (rev 02)

Ate mais...
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
30/10/2008, 08:54
Resposta: #6
 
Bom dia,

Poste aqui a saída do comando lsmod.

Precisamos verificar se os módulos do alsa também estão corretos.

Até mais...

A melhor forma de aprendizado e aquela em que um grupo de pessoas, tentam ajudar umas as outras.
________________
Marcelo R. Silva
http://mrs-linux.blogspot.com
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
30/10/2008, 18:32
Resposta: #7
 
Boa noite,
Acho que a resposta do comando foi meio enorme demais mas vamos la:
lsmod
Module Size Used by
nls_cp437 11392 0
vfat 17920 0
fat 58160 1 vfat
nls_iso8859_1 9600 1
isofs 39652 1
ppdev 13704 0
lp 17352 0
button 13472 0
ac 10376 0
battery 15496 0
snd_atiixp_modem 21644 0
snd_via82xx_modem 20748 0
snd_intel8x0m 23440 0
loop 23044 0
tsdev 13312 0
psmouse 45468 0
serio_raw 11780 0
snd_intel8x0 41000 0
snd_ac97_codec 117464 4 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0
ac97_bus 7168 1 snd_ac97_codec
parport_pc 42664 1
parport 44428 3 ppdev,lp,parport_pc
pcspkr 7680 0
snd_pcm_oss 48288 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 89992 6 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd​_pcm_oss
snd_timer 28424 1 snd_pcm
snd 65896 9 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd​_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 13088 1 snd
snd_page_alloc 15376 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm
option 15616 0
k8temp 10496 0
usbserial 40816 1 option
shpchp 38428 0
pci_hotplug 37252 1 shpchp
evdev 15232 3
reiserfs 232960 1
sd_mod 33280 3
sg 41128 0
usb_storage 90432 0
sr_mod 22564 1
cdrom 39848 1 sr_mod
generic 10372 0 [permanent]
sata_sis 14340 2
sis5513 17680 0 [permanent]
ide_core 147728 3 usb_storage,generic,sis5513
floppy 67560 0
sis900 29056 0
mii 10240 1 sis900
ehci_hcd 37900 0
ohci_hcd 25860 0
pata_sis 20868 2 sata_sis
ata_generic 13188 0
libata 132528 3 sata_sis,pata_sis,ata_generic
scsi_mod 164536 5 sd_mod,sg,usb_storage,sr_mod,libata
thermal 19600 0
processor 39912 1 thermal
fan 9992 0

O que eh esse comando???
imagino que seja para listar os drivers(apenas um chute)

Ate logo.
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
30/10/2008, 20:32
Resposta: #8
 
Boa noite,

O comando lsmod server para listar os módulos que estão carregados.

Bom vamos lá :

Desinstale a versão que você tem instalada do pacote sl-modem, pois iremos compilar o driver para eliminar o conflito entre o alsa e slmodemd. Para saber faça :

dpkg -l modem

Depois execute o comando aptitude com o resultado do comando anterior :

aptitude purge sl-modem-xxx

Baixe o driver do modem :
http://linmodems.technion.ac.il/package ... 817.tar.gz

Após baixar o driver faça :

tar -zxvf slmodem-2.9.11-20080817.tar.gz
cd slmodem-2.9.11-20080817
cd modem
nano Makefile

Procure pela seguinte linha :
#SUPPORT_ALSA:=1

Descomente ela, ficando assim :
SUPPORT_ALSA:=1

Salve as alterações no arquivo e volta a pasta principal do modem, ou seja, a pasta slmodem-2.9.11-20080817, ai faça :

make
su (usuário root)
make install
modprobe -r slamr
slmodemd --country=BRAZIL --alsa --perm=0666 hw:1
rm -f /dev/modem
ln -sf /devttySL0 /dev/modem

Depois de todos os passos acima, tente configurar o gnome-ppp novamente.

Se houver algum erro, em algum dos passos, não avance ao passo posterior, poste aqui o erro.

Espero ter ajudado...
Até mais...

A melhor forma de aprendizado e aquela em que um grupo de pessoas, tentam ajudar umas as outras.
________________
Marcelo R. Silva
http://mrs-linux.blogspot.com
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
31/10/2008, 22:07
Resposta: #9
 
Boa noite...

Todos os passos que vc me passou deram certo ate esse:

make install

surgiu esse erro

"Sem regra para processar o alvo `install'. Pare."

Ate logo
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
01/11/2008, 06:25
Resposta: #10
 
Bom dia,

Tente fazer make all, mas lembre-se você deve estar dentro da pasta slmodem-2.9.11-20080817 como usuário root.

Até mais...

A melhor forma de aprendizado e aquela em que um grupo de pessoas, tentam ajudar umas as outras.
________________
Marcelo R. Silva
http://mrs-linux.blogspot.com
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
04/11/2008, 23:35
Resposta: #11
 
Boa noite,

Demorei para responder mas houve um problema ate mesmo com o make all eu acho que deu problemas
da so uma olhada na resposta do make all:

"carlos:/home/carlos/Desktop/slmodem-2.9.11-20080817# make all
make -C modem all
make[1]: Entrando no diretório `/home/carlos/Desktop/slmodem-2.9.11-20080817/modem'
gcc -m32 -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_main.o -c modem_main.c
modem_main.c:64:28: error: alsa/asoundlib.h: Arquivo ou diretório não encontrado
modem_main.c:106: error: expected specifier-qualifier-list before ‘snd_pcm_t’
modem_main.c:134: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
modem_main.c: In function ‘alsa_mixer_setup’:
modem_main.c:141: error: ‘snd_mixer_elem_t’ undeclared (first use in this function)
modem_main.c:141: error: (Each undeclared identifier is reported only once
modem_main.c:141: error: for each function it appears in.)
modem_main.c:141: error: ‘elem’ undeclared (first use in this function)
modem_main.c:148: warning: implicit declaration of function ‘snd_mixer_open’
modem_main.c:148: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c:150: warning: implicit declaration of function ‘snd_strerror’
modem_main.c:150: warning: format ‘%s’ expects type ‘char *’, but argument 2 has type ‘int’
modem_main.c:153: warning: implicit declaration of function ‘snd_mixer_attach’
modem_main.c:153: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c:155: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘int’
modem_main.c:158: warning: implicit declaration of function ‘snd_mixer_selem_register’
modem_main.c:158: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c:160: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘int’
modem_main.c:163: warning: implicit declaration of function ‘snd_mixer_load’
modem_main.c:163: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c:165: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘int’
modem_main.c:169: warning: implicit declaration of function ‘snd_mixer_first_elem’
modem_main.c:169: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c:169: warning: implicit declaration of function ‘snd_mixer_elem_next’
modem_main.c:170: warning: implicit declaration of function ‘snd_mixer_selem_get_name’
modem_main.c:170: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast
modem_main.c:170: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:170: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast
modem_main.c:170: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:170: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:170: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:171: error: ‘struct device_struct’ has no member named ‘hook_off_elem’
modem_main.c:172: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast
modem_main.c:172: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:172: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast
modem_main.c:172: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:172: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:172: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:173: error: ‘struct device_struct’ has no member named ‘cid_elem’
modem_main.c:174: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast
modem_main.c:174: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:174: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast
modem_main.c:174: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:174: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:174: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast
modem_main.c:175: error: ‘struct device_struct’ has no member named ‘speaker_elem’
modem_main.c:178: error: ‘struct device_struct’ has no member named ‘hook_off_elem’
modem_main.c:182: warning: implicit declaration of function ‘snd_mixer_close’
modem_main.c:182: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c:183: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c: In function ‘alsa_device_setup’:
modem_main.c:193: error: storage size of ‘pfd’ isn’t known
modem_main.c:199: warning: format ‘%s’ expects type ‘char *’, but argument 2 has type ‘int’
modem_main.c:201: warning: implicit declaration of function ‘snd_pcm_open’
modem_main.c:201: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:201: error: ‘SND_PCM_STREAM_PLAYBACK’ undeclared (first use in this function)
modem_main.c:201: error: ‘SND_PCM_NONBLOCK’ undeclared (first use in this function)
modem_main.c:203: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘int’
modem_main.c:207: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:207: error: ‘SND_PCM_STREAM_CAPTURE’ undeclared (first use in this function)
modem_main.c:209: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘int’
modem_main.c:213: warning: implicit declaration of function ‘snd_pcm_poll_descriptors’
modem_main.c:213: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:215: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘int’
modem_main.c:223: warning: implicit declaration of function ‘snd_output_stdio_attach’
modem_main.c:223: error: ‘dbg_out’ undeclared (first use in this function)
modem_main.c:193: warning: unused variable ‘pfd’
modem_main.c: In function ‘alsa_device_release’:
modem_main.c:230: warning: implicit declaration of function ‘snd_pcm_close’
modem_main.c:230: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:231: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:232: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c:233: error: ‘struct device_struct’ has no member named ‘hook_off_elem’
modem_main.c:234: warning: implicit declaration of function ‘snd_mixer_selem_set_playback_switch_all’
modem_main.c:234: error: ‘struct device_struct’ has no member named ‘hook_off_elem’
modem_main.c:235: error: ‘struct device_struct’ has no member named ‘cid_elem’
modem_main.c:236: error: ‘struct device_struct’ has no member named ‘cid_elem’
modem_main.c:237: error: ‘struct device_struct’ has no member named ‘speaker_elem’
modem_main.c:238: error: ‘struct device_struct’ has no member named ‘speaker_elem’
modem_main.c:239: error: ‘struct device_struct’ has no member named ‘mhandle’
modem_main.c: In function ‘alsa_xrun_recovery’:
modem_main.c:250: warning: implicit declaration of function ‘snd_pcm_prepare’
modem_main.c:250: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:252: warning: format ‘%s’ expects type ‘char *’, but argument 3 has type ‘int’
modem_main.c:255: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:256: warning: implicit declaration of function ‘snd_pcm_format_set_silence’
modem_main.c:256: error: ‘SND_PCM_FORMAT_S16_LE’ undeclared (first use in this function)
modem_main.c:257: warning: implicit declaration of function ‘snd_pcm_writei’
modem_main.c:257: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:259: warning: format ‘%s’ expects type ‘char *’, but argument 3 has type ‘int’
modem_main.c:262: warning: implicit declaration of function ‘snd_pcm_start’
modem_main.c:262: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:264: warning: format ‘%s’ expects type ‘char *’, but argument 3 has type ‘int’
modem_main.c: In function ‘alsa_device_read’:
modem_main.c:276: warning: implicit declaration of function ‘snd_pcm_readi’
modem_main.c:276: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c: In function ‘alsa_device_write’:
modem_main.c:292: error: ‘struct device_struct’ has no member named ‘started’
modem_main.c:295: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c: At top level:
modem_main.c:317: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘mdm2snd_format’
modem_main.c:325: error: expected ‘)’ before ‘*’ token
modem_main.c: In function ‘alsa_start’:
modem_main.c:451: error: ‘struct device_struct’ has no member named ‘period’
modem_main.c:452: error: ‘struct device_struct’ has no member named ‘buf_periods’
modem_main.c:453: warning: implicit declaration of function ‘setup_stream’
modem_main.c:453: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:456: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:459: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:460: error: ‘struct device_struct’ has no member named ‘period’
modem_main.c:460: error: ‘struct device_struct’ has no member named ‘buf_periods’
modem_main.c:462: error: ‘SND_PCM_FORMAT_S16_LE’ undeclared (first use in this function)
modem_main.c:468: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:473: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:474: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:475: warning: implicit declaration of function ‘snd_pcm_link’
modem_main.c:475: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:475: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:477: warning: format ‘%s’ expects type ‘char *’, but argument 3 has type ‘int’
modem_main.c:480: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:482: warning: format ‘%s’ expects type ‘char *’, but argument 3 has type ‘int’
modem_main.c:485: error: ‘struct device_struct’ has no member named ‘started’
modem_main.c: In function ‘alsa_stop’:
modem_main.c:493: error: ‘struct device_struct’ has no member named ‘started’
modem_main.c:494: warning: implicit declaration of function ‘snd_pcm_drop’
modem_main.c:494: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:495: warning: implicit declaration of function ‘snd_pcm_nonblock’
modem_main.c:495: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:496: warning: implicit declaration of function ‘snd_pcm_drain’
modem_main.c:496: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:497: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:498: warning: implicit declaration of function ‘snd_pcm_unlink’
modem_main.c:498: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c:499: warning: implicit declaration of function ‘snd_pcm_hw_free’
modem_main.c:499: error: ‘struct device_struct’ has no member named ‘phandle’
modem_main.c:500: error: ‘struct device_struct’ has no member named ‘chandle’
modem_main.c: In function ‘alsa_ioctl’:
modem_main.c:513: error: ‘struct device_struct’ has no member named ‘hook_off_elem’
modem_main.c:515: error: ‘struct device_struct’ has no member named ‘hook_off_elem’
modem_main.c:518: error: ‘struct device_struct’ has no member named ‘speaker_elem’
modem_main.c:519: warning: implicit declaration of function ‘snd_mixer_selem_set_playback_volume_all’
modem_main.c:520: error: ‘struct device_struct’ has no member named ‘speaker_elem’
modem_main.c:524: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:525: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c: In function ‘modemap_start’:
modem_main.c:554: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:565: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c: In function ‘modemap_ioctl’:
modem_main.c:586: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c: In function ‘modem_run’:
modem_main.c:836: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:843: error: ‘struct device_struct’ has no member named ‘delay’
modem_main.c:870: error: ‘struct device_struct’ has no member named ‘delay’
make[1]: ** [modem_main.o] Erro 1
make[1]: Saindo do diretório `/home/carlos/Desktop/slmodem-2.9.11-20080817/modem'
make: ** [modem] Erro 2"

apesar de longa, acho que o final da mensagem diz tudo

Espero naun estar te encomodando com isso...

Ate mais...
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
05/11/2008, 07:46
Resposta: #12
 
Bom dia,

Vamos preparar o ambiente para efetuar a compilação do driver, talvez seja este o problema de não ter funcionado a compilação. Verifique o link abaixo :

http://wiki.forumdebian.com.br/index.ph ... do_Drivers

Após preparação do ambiente tente compilar o driver novamente e verifique se o erro persiste.

Até mais...

A melhor forma de aprendizado e aquela em que um grupo de pessoas, tentam ajudar umas as outras.
________________
Marcelo R. Silva
http://mrs-linux.blogspot.com
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
26/11/2008, 22:39
Resposta: #13
 
Boa noite,

Depois de 20 dias tentando baixar o source, por problemas com a internet(lentidão+falta de tempo rsrsrsrsrs), preparei o kernel e deu tudo certo...até o ponto de compilar o driver.
Deu exatamente o mesmo erro...
A unica coisa que me "prende" ao windows é esse modem ja que é a unica conecção com a net...

Ate mais.
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
12/12/2008, 06:31
Resposta: #14
 
Bom dia,

Verifique se você possue o pacote libasound2-dev instalado.

Código:
dpkg -l | grep libasound2

Caso não tenha o pacote instalado, efetue a instalação :

Código:
sudo aptitude install libasound2-dev

Depois tente compilar o driver novamente, e verifique se os mesmos erros persistem.

Até mais...

A melhor forma de aprendizado e aquela em que um grupo de pessoas, tentam ajudar umas as outras.
________________
Marcelo R. Silva
http://mrs-linux.blogspot.com
Visitar o website do usuário Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
16/12/2008, 23:36
Resposta: #15
 
Boa Noite,

Descobri, ao baixar varios programas em tar.gz que todos (incluindo ai o driver do modem) davam o mesmo problema ou algo muito semelhante.
Sempre problemas de compilação...

Até mais...
Encontrar todas as respostas deste usuário
Citar esta mensagem em uma resposta
Responder 


Ir ao Fórum:


Usuários visualizando este tópico: 1 Visitantes

Entre em Contato | Fórum Debian | Voltar ao Topo | Voltar ao Conteúdo | Modo Leve (Arquivo) | Feeds RSS